Encountering ''just some design problems related to the test setup,''
which however turn out hard to overcome. Seems that, in my eagerness
to create a succinct and clear presentation of the test, I went into
danger territory, overstretching the abilities of the C++ language.
After working with a set of tools created step by step over an extended span of time,
''for me'' the machinations of this setup seem to be reduced to flipping a toggle
here and there, and I want to focus these active parts while laying out this test.
''This would require'' to create a system of nested scopes, while getting more and more
specific gradually, and moving to the individual case at question; notably any
clarification and definition within those inner focused contexts would have to be
picked up and linked in dynamically.
Yet the C++ language only allows to be ''either'' open and flexible towards
the actual types, or ''alternatively'' to select dynamically within a fixed
set of (virtual) methods, which then must be determined from the beginning.
It is not possible to tweak and adjust base definitions after the fact,
and it is not possible to fill in constant definitions dynamically
with late binding to some specific implementation type provided only
at current scope.
Seems that I am running against that brick wall over and over again,
piling up complexities driven by an desire for succinctness and clarity.
Now attempting to resolve this quite frustrating situation...
- fix the actual type of the TestChainLoad by a typedef in test context
- avoid the definitions (and thus the danger of shadowing)
and use one `testSetup()` method to place all local adjustments.
With the addition of a second tool `bench::ParameterRange`,
the setup of the test-context for measurement became confusing,
since the original scheme was mostly oriented towards the
''breaking point search.''
On close investigation, I discovered several redundancies, and
moreover, it seems questionable to generate an ''adapted-schedule''
for the Parameter-Range measurement method, which aims at overloading
the scheduler and watch the time to resolve such a load peak.
The solution entertained here is to move most of the schedule-ctx setup
into the base implementation, which is typically just inherited by the
actual testcase setup. This allows to leave the decision whether to build
an adapted schedule to the actual tool. So `bench::BreakingPoint` can
always setup the adapted schedule with a specific stress-factor,
while `bench::ParameterRange` by default does nothing in this
respect, and thus the `ScheduleCtx` will provide a default schedule
with the configured level-duration (and the default for this is
lowered to 200µs here).
In a similar vein, calculation of result data points from the raw measurement
is moved over into the actual test setup, thereby gaining flexibility.
Rework the existing tool to capture the measurement series
into the newly integrated CSV-based data storage, allowing
to turn the results into a Gnuplot-visualisation.
...which is added automatically whenever additional data columns are present
Result can only be verified visually
* the upper diagram should show the first fibonacci points
* a (correct) linear regression line should be overlayed in red
* below, a secondary diagram should appear, with aligned axis
* the row "one" in this diagram should be shown as impulses
* the further rows "two" and "three" should be drawn as
green points, using the secondary Y-axis (values 100-250)
* Gnuplot can handle missing data points
The idea is to build the Layout-branching into the generated Gnuplot script,
based on the number of data columns detected. If there is at least one further
data column, then the "mulitplot" layout will be used to feature this
additional data in a secondary diagram below with aligned axis;
if more than one additional data column is present, all further
visualisation will draw points, using the secondary Y-axis
Moreover, Gnuplot can calculate the linear regresssion line itself,
and the drawing will then be done using an `arrow` command,
defining a function regLine(x) based on the linear model.
- `forElse` belongs to the metaprogramming utils
- have a CSVLine, which is a string with custom appending mechanism
- this in turn allows CSVData to accept arbitrary sized tuples,
by rendering them into CSVLine
The intention is to create a library of convenient building blocks;
providing a visualisation should be as simple as invoking a free function
with CSV data, yet with the ability to tweak some lables or display
variations if desired.
This can be achieved by..
* having a series of ready-made standard visualisations
* expose a function call for each, accepting a data-context builder
* provide secondary convenience shortcuts, which add some of the expected bindings
* notably a shortcut is provided to take the data as CSV-string
* augmented by a wrapper/builder to allow defining data points inline
Deliberately keep it unstructured and add dedicated functions
for each new emerging use case; hopefully some commen usage scheme
will emerge over time.
* Data is to be handed in as an iterator over CSV-strings.
* will have to find out about additional parametrisation on a case-by-case base
The default visuals of gnuplot are simple,
yet tend to look cluttered and are not well suited for our purpose
We need the following presentation
* a scatter diagram with a regression line
* additionally a secondary diagram stacked below, with aligned axis
Thus 🠲 R-T-F-M
* The [http://gnuplot.info/ Gnuplot docu] is exhaustive, yet hard to get into
* Helpful was this collection of [http://gnuplotting.org/ example solutions for scientific plots]
* and — Stackoverflow...
A minimalist `TextTemplate` engine is available for in-project use.
* supports only the bare minimum of features (no programming language)
* substitution of `${placeholder}` by key-name data access
* conditional section `${if key}...${end if}`
* iteration over a data sequence
* other then most solutions available as library,
this implementation does **not require** a specific data type,
nor does it invent a dynamic object system or JSON backend;
rather, a generic ''Data Source Adapter'' is used, which can
be specialised to access any kind of ''structured data''
* the following `DataSource` specialisations are provided
* `std::map<string,string>`
* Lumiera »External Tree Description« (based on `GenNode`)
* a string-based spec for testing
...turns out challenging, since our intention here
is borderline to the intended design of the Lumiera ETD.
It ''should work'' though, when combined with a Variant-visitor...
Document existing data binding logic and investigate in detail
what must be done to enable a similar binding backed by Lumiera's ETD structures.
This analysis highlights some tricky aspects, which can be accommodated by
slight adjustments and generalisations in the `TextTemplate` implementation
* `GenNode` is not structured string data, rather binary data
* thus exposing a std::string_view is not adequate, requiring to
pick up the result type from the actual data binding
* moreover, to allow for arbitrary nested scopes, a back-pointer
to the parent scope must be maintained, which requires stable memory locations.
This can best be solved within the InstanceCore itself, which manages
the actual hierarchy of data source references.
* the existing code happens already to fulfil this requirement, but
for sake of clarity, handling of such a nested scope is now extracted
into a dedicated operation, to highlight the guaranteed memory layout.
We use a DataSrc<DAT> template to access the actual data to be substituted.
However, when applying the Text-Template, we need to pick the right
specialisation, based on the type of the actual data provided.
Here we face several challenges:
* Class-Template-Argument-Deduction starts from the *primary* template's constructors.
Without that, the compiler will only try the copy constructor and will
never see the constructors of partial specialisations.
This can be fixed by providing a ''dummy constructor''.
* The specifics of how to provide a custom CTAD deduction guide
for a **nested template** are not well documented. I have found
several bug reports, and seemingly one of these bugs failed my
my various attempts. Moreover it is ''not clear if such a deduction
guide can even be given outside of the class definition scope.''
For the intended usage pattern this would be crucial, since users
are expected to provide further specialisations of the DataSrc-template
* Thus I resorted to the ''old school solution,'' which is to use
a ''free builder function'' as an extension point. Thus users could
provide further overloads for the `buildDataSrc()` function.
* Unfortunately, SFINAE-Tricks are way more limited for function overload.
Thus it seems impossible to have a generic and more specialised cases,
unless all special cases are disjoint.
Thus the solution is far from perfect, ''yet for the current situation it seems
sufficient'' (and C++20 Concepts will greatly help to resolve this kind of problems)
...implemented by simply parsing the string into key=value pairs,
which are then stored into a shared map. The actual data binding
implementation can thus be inherited from the existing Map-binding
While they were detected just fine, thy were passed-through
unaltered, which subverts the purpose of such an escape,
which is to allow for the tag syntax to be present in the
processed, substituted document (e.g. when generating a
shell script)
thus `\${escaped}` becomes `${escaped}`
...using a ''special protocol'' to represent iterative data sequences
* use an Index-Key with a CSV list of element prefixes
* synthesise key-prefixes for each data element
* perform lookup with the decorated key first
This allows to somehow ''emulate'' nested associations within a single, flat Map.
Obviously this is more like a proof-of-concept; actually the Map-databinding
is meant to handle the simple cases, where just placeholders are to be substituted.
The logic structures are much more relevant when binding to structural data,
most notably to the Lumiera _External Tree Description_ format, which is
used for model data and inter-layer communication.
- the basic interpretation of Action-tokens is already in place
- add the interpretation of conditional and looping constructs
- this includes helpers for
* reset to another Action-token index
* recursive interpretation of the next token
* handling of nested loop evaluation context
In order to make this implementation compile, also the skeleton
of the Map-string-string data binding must be completed, including
a draft how to handle nested keys in a simple map
playing the »fence post problem« the other way round
and abandoning the ''pull processing'' in favour of direct manipulation
leads to much clearer formulation of the code-generation logic
...turns out the ''pipeline design'' is not a good fit for the
Action compilation, since the compiler needs to refer to previous Actions;
better to let the compiler ''build'' the `ActionSeq`
...implemented as »custom processing layer« within a
demand-driven parsing pipeline, with the ability to
inject additional Action-tokens to represent the intermittent
constant text between tags; special handling to expose one
constant postfix after the last active tag.
The way I've written this helper template, as a byproduct
it is also possible to maintain the back-refrence to the container
through a smart-ptr. In this case, the iterator-handle also manages
the ownership automatically.
...mostly we want the usual convenient handling pattern for iterators,
but with the proviso actually to perform an access by subscript,
and the ability to re-set to another current index
* establish the feature set to provide
* choose scheme for runtime representation
* break down analysis to individual parsing and execution steps
* conclude which actions to conduct and the necessary data
* derive the abstract binding API required
Conducted an extended investigation regarding text templating
and the library solutions available and still maintained today.
The conclusion is
* there are some mature and widely used solutions available for C++
* all of these are considered a mismatch for the task at hand,
which is to generate Gnuplot scripts for test data visualisation
Points of contention
* all solutions offer a massive feature set, oriented towards web content generation
* all solutions provide their own structured data type or custom property-tree framework
**Decision** 🠲 better to write a minimalistic templating engine from scratch rather
Read the documentation and find out how to generate the kind of diagram
necessary for visualisation of Scheduler-Stress-Test observations.
I used to have basic Gnuplot knowledge, and thus had to find out about
- reading CSV
- supported diagram types
- layering and styling
Conclusion: will use Gnuplot and generate a script from Test code
showDecimal -> decimal10 (maximal precision to survive round-trip through decimal representation=
showComplete -> max_decimal10 (enough decimal places to capture each possible distinct floating-point value)
Use these new functions to rewrite the format4csv() helper
verify also that clean-up happens in case of exceptions thrown;
as an aside, add Macro to check for ''any'' exception and match
on something in the message (as opposed to just a Lumiera Exception)
...using the same method for sake of uniformity
Also move the permissions helpers to the file.hpp support functions
and setup a separate unit test for these
Inspired by https://stackoverflow.com/a/58454949
Verified behaviour of fs::create_directory
--> it returns true only if it ''indeed could create'' a new directory
--> it returns false if the directory exists already
--> it throws when some other obstacle shows up
As an aside: the Header include/limits.h could be cleaned up,
and it is used solely from C++ code, thus could be typed, namespaced etc.
Since this is a much more complicated topic,
for now I decided to establish two instances through global variables:
* a sequence seeded with a fixed starting value
* another sequence seeded from a true entropy source
What we actually need however is some kind of execution framework
to define points of random-seeding and to capture seed values for
reproducible tests.
Relying on random numbers for verification and measurements is known to be problematic.
At some point we are bound to control the seed values -- and in the actual
application usage we want to record sequence seeding in the event log.
Some initial thoughts regarding this intricate topic.
* a low-ceremony drop-in replacement for rand() is required
* we want the ability to pick-up and control each and every usage eventually
* however, some usages explicitly require true randomness
* the ability to use separate streams of random-number generation is desirable
