the reason for the failure, as it turned out,
is that 'noexcept' is part of the function signature since C++17
And, since typically a STL container has const and non-const variants
of the begin() and end() function, the match to a member function pointer
became ambuguous, when probing with a signature without 'noexcept'
However, we deliberately want to support "any STL container like" types,
and this IMHO should include types with a possibly throwing iterator.
The rationale is, sometimes we want to expose some element *generator*
behind a container-like interface.
At this point I did an investigation if we can emulate something
in the way of a Concept -- i.e. rather than checking for the presence
of some functions on the interface, better try to cover the necessary
behaviour, like in a type class.
Unfortunately, while doable, this turns out to become quite technical;
and this highlights why the C++20 concepts are such an important addition
to the language.
So for the time being, we'll amend the existing solution
and look ahead to C++20
as it turns out, "almost" the whole codebase compiles in C++17 mode.
with the exception of two metaprogramming-related problems:
- our "duck detector" for STL containers does not trigger anymore
- the Metafunction to dissect Function sigantures (meta::_Fun) flounders
When drafting the time handling framework some years ago,
I foresaw the possible danger of mixing up numbers relating
to fractional seconds, with other plain numbers intended as
frame counts or as micro ticks. Thus I deliberately picked
an incompatible integer type for FSecs = boost::rational<long>
However, using long is problematic in itself, since its actual
bit length is not fixed, and especially on 32bit platforms long
is quite surprisingly defined to be the same as int.
However, meanwhile, using the new C++ features, I have blocked
pretty much any possible implicit conversion path, requiring
explicit conversions in the relevant ctor invocations. So,
after weighting in the alternatives, FSecs is now defined
as boost::rational<int64_t>.
GCC8 now spots and warns about such mismatches.
And we should take such warnings seriously;
code produced by the newer GCC versions tends to segfault,
especially under -O2 and above, when a return statement is
actually missing, even if the return value is actually not
used at call site.
Here, a functor to unlock the active "guard" is passed into
a macro construct, which basically allows to abstract the
various kinds of "guards", be it mutex, condition variable
or the like.
Seemingly, the intention was to deal with a failure when
unlocking -- however all the real implementations prefer
to kill the whole application without much ado.
...to solve the problem with interwoven nested ctor invocation.
This interface also promises to help with nested invcations,
without being overly generic.
Our diff language requires a diff to handle the complete contents of the target.
Through this clean-up hook this is now in fact enforced.
The actual reason for adding this however was that I need to ensure
listeners are triggered
As it turned out, the reason was a missing move-ctor.
The base of the whole DSL-Stack, TreeMutator, is defined MoveOnly,
and this is also the intended use (build an anonymous instance
through the DSL and move it into the work buffer prior to diff application)
However, C++ does *cease to define* a move ctor implicitly,
whenever /one of the "big five" is defined explicitly/.
So Detector4StructuralChanges was the culprit, it defined a dtor,
but failed to define the move ctor explicitly.
So.... well, this did cost me several hours to track down,
yet I still rather do not want to write all those ctors explicitly all the time,
and so I am still in favour of implicitly generated ctors, even if they hurt sometimes.
with the new decorator layer, we suddenly trigger a chain of template instantiation errors.
At first sight, they are almost undecipherable, yet after some experimentation, it becomes clear
that they relate down to the base class (TreeMutator), which is defined MoveOnly
This seems to indicate that, at some point in the call chain, we are
digressing from the move-construction scheme and switch over to copy construction,
which in the end failst (and shall fail).
Inconclusive, to be investigated further
basically the solution was a bit too naive and assumed everything is similar to a vector.
It is not, and this leads to some insidious problems with std::map, which hereby
are resolved by introducing ContainerTraits
All of the existing "simple" tests for the »Diff Framework« are way to much low-level;
they might indeed be elementary, but not introductory and simple to grasp.
We need a very simplistic example to show off the idea of mutation by diff,
and this simple example can then be used to build further usage test cases.
My actual goal for #1206 to have such a very basic usage demonstration and then
to attach a listener to this setup, and verify it is actually triggered.
PS: the name "GenNodeBasic_test" is somewhat pathetic, this test covers a lot
of ground and is anything but "basic". GenNode in fact became a widely used
fundamental data structure within Lumiera, and -- admittedly -- the existing
implementation might be somewhat simplistic, while the whole concept as such
is demanding, and we should accept that as the state of affairs
now the lifecycle of widget and hook are tightly interwoven.
Indeed the test uncovered a situation where a call into the
already destroyed Canvas might halt the application.
...basically it occurred to me that in practice we will never have to deal
with isolated ViewHooks, rather with widgets-combinded-with-a-hook.
So the idea is to combine both into a template ViewHooked<W>
basically this attempts to work around an "impedance mismatch" caused by relying on Lumiera's Diff framework.
Applying a diff might alter the structural order of components, without those componets
being aware of the change. If especially those components are attached into some
UI layout, or otherwise delegate to display widgets, we need a dedicated mechanism
to reestablish those display elements in proper order after applying the change.
The typical examples is a sequence of sub-Tracks, which might have been reordert due
to applying rules down in the Steam Layer. The resulting diff will propagate the
new order of sub-Tracks up into the UI, yet now all of the elaborate layout and
space allocation done in the presentation code needs to be adjusted or even
recomputed to accomodate the change.
...to form a single framework for view attachment.
Obviously, we have two quite distinct cases to cover
- attaching a widget onto a canvas
- hooking a widget as subtree into a grid/tree control
By applying a Diff, the children of some timeline element (track) may be re-ordered.
This imposes specific problems, since these elements hold onto slave-Widgets,
which are already attached into some elaborated and nested widget structure.
To keep complexity under control, we can not allow the TrackPresenter to have
any knowledge regarding the implementation structure of these target widgets.
Thus I am pondering the idea to represent that relation as an abstracted ViewHook link
...which serves to solve the problem with Canvas access.
Basically we do not want each and every Clip widget to be aware of the concrete canvas implementation widget;
and in addition, automated removal of widgets from the Canvas seems desirable
This is dummy/test/diagnostics code and should be removed when the track display code is complete!
It can be activated by sending a "mark"-Message via the UI-Bus, towards the
Timeline element to be tested (Tip: use the same ID as used when injecting
the Timeline via the TestControl Dialog box). When receiving this message
(asynchronously), the TimelineControler asks each nested TrackPresnter
to inject a Button with the corresponding track name onto the BodyCanvasWidget.
This allows us to verify the coordinate calculation and size allocation --
and indeed, the numbers are not yet correct (TODO)
admittedly this is a bit sketchy, but I don't have a better framework to hinge upon right now.
Thus we store the vertical start coordinates and the offset of the content area
as a side effect, while calculating the TrackProfile
...which has the nice additional effect of exposing box-shadow on the outside of the content area too.
Thus the content area now behaves equivalent to the rulers, and adjacent
content space of simple tracks without rulers and nesting can be slightly
offset from each other through a margin in CSS
In the end, I used the profile building pass to also calculate and sum up the vertical offsets.
Seems to be the only sane approach to get really precise values, since adjacent
upwards slopes can be combined at various places (and I do not want to use the
actual drawing code for this calculation)
need to investigate and probably need to store per track offset values
already while building the track profile. The primary reason for the
observed discrepancy seems to be the rather flexible combination of
slope borders.
Especially note the tricks we need to play in order to allow for (limited) usage of CSS3 box-shadows.
The reason is, all these CSS3 effects are rendered in one shot and combinend on the StyleContext::render_background() call
Thus we need to ensure that the background is properly aligned with the frames
seemingly, the Box with PACK_SHRINK allocates a zero height to the rulerCanvas initally,
which is correct at that point, since the widgets are not yet realised.
However, when we later set_size() on the rulerCanvas, the enclosing Box should reflow.
It does indeed if the child widget is a button or something similar, however,
somehow this reflowing does not work when we set_size on the canvas.
A workaround is to place a new set_size_request().
TODO: do this more precisely, and only on the rulerCanvas. To the contrary,
the mainCanvas is placed into a scolling-pane and thus does not need a size-Request.
Moreover, the latter automatically communicates with the hadjustment() / vadjustment() of
the enclosing scrollbars.
as can be verified with the debugger, it sets the correct sizes now.
And it is called only once (unless the content size actually changes).
TODO: however, the visible display of the GTK widgets is not adjusted
- CSS3 effects like box-shadow are applied with the StyleContext::render_background() function
* first, an outset box-shadow is rendered _outside_ the box given as parameter to `render_background()`
* then the box is filled with the background colour
* and last, an inset box-shadow is rendered _inside_ the area of a would-be border,
without rendering the border itself.
* consequently we can not shade the border itself and we can not shade the content
Indeed I had missed to connect the new "free standing" StyleContext to
some Gdk::Screen, typically the default screen (connected to the current
top level window). But seemingly this was not really necessary, since,
somehow magically, the style context must have connected itself to some
screen, otherwise it wouldn't be able to access the CSS cascade.
Anyhow, fixing this omission does not resolve our problem.
Nor does any combination of re-connecting, invalidating etc.
I poked around in the GTK (C) code a lot, but could not spot any obvious
missing initialisation step. To much magic around here. Without massive
debugging into GTK internals, I don't see any way to further this
investigation. And, moreover there is a viable workaround
(namely to set and remove the classes explicitly, which works as intended)
I posted a question on Stackoverflow and for now
I'll file this topic as "inconclusive"
https://stackoverflow.com/q/57342478
DONE
- can now control the border size through a set of modifier classes
OPEN
- but context_save()/restore() does not work; seem to loose all styling
- not clear how to deal with CSS3 effects like box-shadow
...to find out about GTK's implementation of some aspects of CSS
through Gtk::StyleContext and friends
Basically this is a clone of the existing gtk-canvas-experiment application
...somehow does not yet work as intended...
- unable to control the border-width from code
- Gtk::StyleContext::add_class(name) does not seem to have any effect
We can add our custom classes to custom widgets, and we can set the
widget name, which can be used as #id selector from CSS
Unfortunately we can not set the main CSS node name for CustomWidgets defined through GTKmm (C++)
The latter is only possible when deriving the custom widget in plain-C, which is quite tedious.
On a second thought, this limitation is not so severe as it might seem, because
most of the time you actually do *not* want to change the CSS node name,
because you want to match against existing rules in the theme (e.g. box, or paned)
The actual case here would have been an exception to this rule, since here
it would be nice to anchor the whole custom timeline drawing in an "body.timeline" element
NOTE: Current state for the selector path is now:
window.background box.vertical box[2/3].horizontal widget[2/2] widget paned.vertical widget box.vertical notebook[1/1].frame paned.horizontal.timeline-page box.vertical.timeline.timeline-body fork.timeline
...and perform the initialisation once, when attaching the first timeline to the UI
Now our code produces the following Gtk::WidgetPath (note the last node, which our code added)
window:backdrop:dir-ltr.background box:backdrop:dir-ltr.vertical box:backdrop:dir-ltr[2/3].horizontal widget:backdrop:dir-ltr[2/2] widget:backdrop:dir-ltr paned:backdrop:dir-ltr.vertical widget:backdrop:dir-ltr box:backdrop:dir-ltr.vertical notebook:backdrop:dir-ltr[1/1].frame paned:backdrop:dir-ltr.horizontal box:backdrop:dir-ltr.vertical fork.timeline
For context: The »Advice System« was coined a long time ago, in 2010,
based on the vague impression that it might be useful for that kind of application
we are about to build here. And, as can be expected, none of the usage situations
envisioned at that time was brought to bear. Non the less, the facility came in
handy at times, precisely because it is cross-cutting and allows to pass
information without imposing any systematic relationship between the
communication partners.
And now we've got again such a situation.
The global style manager in the UI has to build a virtual CSS path,
which is needed by drawing code somewhere deep down, and we absolutely
do not want to pass a reference to the style manager over 20 recursive calls.
The alternatives would be
(1) to turn the style manager into a public service
(2) to have a static access function somewhere
(3) to use a global variable.
For rationale, (1) would be overblown, because we do not actually request
a service to do work for us, rather we need some global piece of information.
(2) would be equivalent to (1), just more confusing. And (3) is basically
what the Advice system does, with the added benefit of a clear-cut service
access point and a well defined lifecycle.
This changeset adds the ability to check if actual Advice has been published,
which allows us to invoke the (possibly expensive) GTK path building and
style context building code only once.
- at some (yet to be defined) location, a virtual WidgetPath is constructed
and used to build a Gtk::StyleContext in accordance to the curren CSS
- within the drawing routine, we use Lumiera's Advice-System to access this info
The existing implementation created a Buffer-Type based on various traits,
including the constructor and destructor functions for the buffer content.
However, this necessitates calculating the hash_value of a std::function,
which (see #294) is generally not possible to implement.
So with this changeset we now store an additional identity hash value
right into the TypeHandler, based on the target type placed into the buffer
This was prompted by a test failing under Boost-1.65 (--> see #294)
When reviewed now, the whole idea of testing Steam-Layer Commands for
equivalence feels a bit sketchy.
Just the comparison for the command ''identity'' alone seems sufficient,
i.e. the test if a command-ID is associated with the same backend-handle
and thus the same functor binding.
...when rendering this part, which shall be always visible.
And the rest of the profile needs to be rendered into a second canvas,
which is placed within a pane with scrollbar.
Implemented as a statefull iterator filter
TODO:
- actual draw operations not yet implemented
- find a way how to select the prelude / body part of the track profile
This is a consequence of subsuming the timeline ruler under the concept of an overview track
the template lib::PolymorphicValue seemingly picked the wrong
implementation strategy for "virtual copy support": In fact it is possible
to use the optimal strategy here, since our interface inherits from CloneSupport,
yet the metaprogramming logic picked the mix-in-adapter (which requires one additional "slot"
of storage plus a dynamic_cast at runtime).
The reason for this malfunction was the fact that we used META_DETECT_FUNCTION
to detect the presence of a clone-support-function. This is not correct, since
it can only detect a function in the *same* class, not an inherited function.
Thus, switching to META_DETECT_FUNCTION_NAME solves this problem
Well, this solution has some downsides, but since I intend to rewrite the
whole virtual copy support (#1197) anyway, I'll deem this acceptable for now
TODO / WIP: still some diagnostics code to clean up, plus a better solution for the EmptyBase
...which, in the end, can even be considered the more logical design choice,
since the "verb visitor" is a more elaborated and sophisiticated Verb-Token,
adding the special twist of embedded storage for variable function arguments
...yet still not successful.
The mechanism used for std::apply(tuple&) works fine when applied directly to the target function,
but fails to select the proper overload when passed to a std::forward-call for
"perfect forwarding". I tried again to re-build the situation of std::forward
with an explicitly coded function, but failed in the end to supply a type parameter
to std::forward suitably for all possible cases
...the simplified demo variant in try.cpp is accepted by the compiler and works as intended,
while the seemingly equivalent construction in verb-visitor.hpp is rejected by the compiler
This discrepancy might lead to a solution....?
...but bad news on the main issue:
the workaround consumes the tuple and thus is not tenable!
And what is even worse: the textbook implementation of std::apply is
equivalent to our workaround and also consumes the argument tuple
...which leads to a specific twist here; while in the simple version
we still could hope to get away with a simple uniform uint argument,
the situation has changed altogether now. The canvas has turned into
some generic component, since it is instantiated two times, onece for
the time ruler and once for the actual body content. Thus all of the
specifics of the drawing code need to be pushed into a new, dedicated
renderer component. And this more or less forces us to pass all the
actual presentation variations through the invocation arguments of
the visitor.
So we're now off again for a digression, we need a more generalised visitor
After thinking the whole concept over several times, it occurred to me that
a separate implementation of a time ruler would be quite redundant with the
envisioned feature of per-track overview rulers. Following this line of thought,
the time ruler would just be some specifically configured overview ruler.
This has the somewhat unfortunate consequence, that it becomes the responsibility
of the body canvas to render the overview ruler, thereby somehow delegating
to a common renderer implementation. Which makes the whole setup of the body canvas
way more complex, because now we get *two* canvas like painting areas, one
always visible at top, and the second one, the content area, fully scrollable
within the lower part.
Even while EveryoneElese indulges in cool "flat" UI graphics,
we still think that a plausible 3D structure of UI widgets supports intuitive user interaction
As an asside, this commit fixes a mistake with the licenses of several of these documentation drawings.
I am the author of all these SVGs and thus can fix such a license glitch without much ado.
These drawing shall be licensed in accordance to the general rule for Lumiera Documentation,
which is to use a Libre-style license, here CC-by-sa (which does *not* limit commercial use)
- we got occasional hangups when waiting for disabled state
- the builder was not triggered properly, sometimes redundant, sometimes without timeout
As it turned out, the loop control logic is more like a state machine,
and the state variables need to be separated from the external influenced variables.
As a consequence, the inChange_ variable was not calculated properly when disabled in a race,
and then the loop went into infinite wait state, without propagating this to
the externally waiting client, which caused the deadlock
A classical carry-over of dirty values...
Problem arises, when starting an unconditional wait on the same object monitor,
which previously conducted a timed wait. Then the obsolete timeout from the previous
wait remained in place, causing our Sync-Wrapper (erroneously) to assume a timed wait
and then pthread to return immediately from this timed wait.
The result was permanent idle looping in the ProcDispatcher, after the first command was processed
the new structure causes them now to be installed into $TARGET/stage
which is simply not what I want. I still consider $TARGET/gui the better choice,
since an administrator or packager is not aware of our layer namings.
The existing solution was half baked anyway, it did not really replicate the source tree.
On the other hand, I want to retain the location of the CSS files within the GUI tree,
since I consider it a good practice, to keep "code-like" resources with the actual code,
and not far away in some arcane "data" directory.
No I've noticed, that the env.GuiResource() function is only used once, for this very task.
So, for the time being, we can keep it simple and deditaced to that task, i.e
we pick up all CSS files we find and install it into a single target directory.
NOTE: this issue has brought to my attention two further, completely unrelated issues
* Ticket #1192 (Lumiera hangs on failed GUI start)
* The ProcDispatcher does an idle wait, due to an error in timed-wait implementation
Considering this since some time, since it more and more occurred to me
the existing conventional names are a misfit. And they are dull and clumsy.
This fall, I mentioned it to Benny, and he seemed to be rather favourable towards that idea,
which encourages me just to go ahead. Unfortunately, I am alone on the coding frontier
right now, which has several downsides, but at least it gives me the ability
to pull off radical moves.
...in accordance to our general design guideline: we don't duplicate
actual model values within the controllers/presenters, since our widgets
act themselves as view-model
This change demonstrates how to deal properly with possible duplicate entities
with similar symbolic ID: define a RandomID (to guarantee a distinct hash on each instance).
In the actual implementation, this should happen already within the domain model,
not when constructing the diff (obviously of course...)
This change also adds a mutation sequence to inject the actual track name
same pattern as the existing EntryID, i.e. a human readable symbol plus a hash
but the hash is just random, instead of deriving it from the symbol text.
Use case is when we explicitly need a distinct identity, even when the
human readable symbolic name is the same. Actual example: the fork root in the timeline
so this seems to be the better approach for dealing with this insidious problem.
In some cases -- as here most prominently with the root track within the timeline --
we have to care within the domain model to prepare unique ids even for sub objects
treated as attributes. In the actual case, without that special attention,
all timelines would hold onto an attribute "fork" with the same ID, based
on the type of the nested object plus the string "fork". Thus all root track
representations in the GUI would end up listening to the same ID on the UI-Bus...
...rather extend the "object builder" DSL notation to allow passing in a given EntryID literally.
Rationale is, we should handle the problem of unique IDs on the level of the domain model.
If we attempt to "fix" this within GenNode, the price would be to make the ETD creation stateful
this is not a problem, strictly sepaking, locally.
But it becomes a problem once the GUI uses those attribute IDs
as Element-IDs for tangible UI entities, which need to be uniquely
addressable via the UI-Bus.
An obvious solution is to inject randomness into the Attribute ID hash
these recursively nested helper entities work together with the TimelineCanvas
and enable the latter to draw the track background in the Timeline Widget and
to find out about the vertical coordinates where to place content (Clip, Effects, Markers)
Gtk::Viewport allows to add the ability to scroll a partial view window
for a container larger than the available display area. The position
and movement of this window is controlled by Gtk::Adjustments,
which can be located elsewhere.
Here we use the existing Adjustments of the ScrolledWindow
holding the body canvas; this setup makes the header pane follow
the scroll movements of the body
bottom line is to do most autmatically, and to establish a slave-relation
navigation-area -> timeline-ruler
header-pane-content -> corresponding track-body
this can be accomplished mostly by connecting the aproprieate signals,
thus these widgets will live within the Layout-Manager, which consequently
is renamed into TimelineLayout
the solution idea is to use a helper frame, and an "anchor functor",
which is passed down from the respective parent context, and which
does the actual work of injecting the child widgets at the apropriate
position within the parent display.
seems to work surprisingly well...
the diff application poceeds in the GUI up to the point
where the TrackPresenter need to be inserted into a two-fold display context
To drive the timeline display in the UI ahead, the plan is to have
a faked action, which injects dummy population diff messages into the GUI,
resulting in the build-up of a typical simple session timeline
decision: for now we will represent *every* Timeline present in the Session.
Later it would also possible to skip some representation; however we'd need
a way to store such presentation state such that we'd be able to get at this
persisted stat right at this point here, when processing the Diff.
other than the regular way of building an object,
we do expect a minimal structure to be sent right within the INS message.
Rationale: the standard way would allow for too much leeway and created
unwanted intermediary states. The non-standard way decided upon here
is well within the limits of our diff language
Problem is, the InteractionDirector, being the representation of the model root,
needs to manage and maintain the collection of "timelines". However, these
can not be widgets, rather, they need to attach to widgets living within
the GUI widget structure proper, i.e. within the TimelinePanel
proposed solution is to build a smart handle based on WLink,
but also delegating the DiffMutable interface
This involves a fundamental decision about how to build structures in the Lumiera UI:
They shall be solely created in response to diff messages. Which leads us to
introduce a new (and quite challenging) concept: the »DiffConstituent«
This marks start of actual work on this fundamental task.
Extensive planning from 2016 is available, together with an almost
complete diff binding for the entities involved into timeline display.
''a new hope''
This was quite a long way until we're back at the point of
re-building the timeline anew.
Stash the canvas research code to make room for new things to come
this turned out to be more tricky than expected.
When we initially configure the UI and invoke this->show_all(),
seemingly some draw-callbacks will be scheduled into the event loop.
Just set_visible(false) on the relevant buttons directly after that call
will have no effect (since the widget is still hidden at that point anyway,
it is not yet mapped and realised).
Thus we need to schedule a callback with the Glib::signal_idle(),
so our state detection runs after the initial mapping of the UI
NOTE: there is a minor itch, which I don't address right now:
when adding the error state and thus revealing the additional buttons,
the error log grabs some additional horizontal space, even while there
would be ample space for the additional buttons within the button bar.
When the error state is cleared and the buttons thus hidden again,
the additional horizontal space is dropped and the error log gets
narrower. Probably we'd need some special GTK call to re-allocate
the required space properly
solved by temporarily adding a CSS class.
Mostly this was an issue of writing the Stylesheet properly.
Hint: use the GTK+ inspector, i.e. run with
GTK_DEBUG=interactive target/lumiera
Even while we (still) have the goal to ship our own stylesheet and provide
the typical subdued media-aplication look, right now this porting and styling effort (#1023)
is unfinished and handled with rather low priority (writing code is more important
than toying with styles and looks).
This alternative stylesheet is meant to be used with a typical "light" desktop theme.
We'll add just the bare minimum of definitions to make lumiera work well in that setup.
And right now, I'll use that setup to continue with my development work
Basically we create a pair of marks, with left/right gravity and then
inject the content between. Unfortunately, when the insert position
is the very end of the buffer (which it always is), this trick
leads to nesting the marked regions into each other.
As a remedy, we first insert the trailing newline,
and then attach the insert position one step before
discard all other info log messages and retain only the entries marked as error.
This is also a proof-of-concept regarding position bookmarks and markup.
Implemented by populating a new buffer and swapping it into place.
== possible Scenario ==
1. Gui: sigTerm invoked
2. last Subsystem -> cleans all remaining Subsy entries
3. main-Thread wakens
4. leaves main() und undloads the GUI plug-in
5. which destroys the `DependencyFactory<LocationQuery>` placed in static memory
6. the Gui-Thread returns from sigTerm() and invokes `~UiManager()`
7. which indirectly deregisters through `InteractionDirector` the `LocationQuery` Service
8. `DependInject::Service::shutdown()` grabs the Lock ==> **BOOM**
== Solution ==
Ensure all dtors of the UI backbone are invoked ''prior'' to calling sigTerm()
and especially our provisional dummy code to execute some commands "right here"
should also check and raise captured exceptions from command invocation
As it turns out, several problems reinforce each other
- lumiera error does not properly propagate the cause message
- our test/dummy code does not check the ExecResult
- thus the exception is detected rather accidentally, when entring the next sync/wait state
- emergency shutdown is chaotic in its very nature (this is well known...)
- but especially triggerShutdown is not airtight and might die...
- causing the shutdown to hang....
And last but not least, a ZombieCheck tripwire got triggered,
but unfortunately I was unable to get hold of the zombie iteself
test_meta_markAction always produces a state mark with payload type string.
However, the model::Tangible expects a bool payload when handling the "expand" mark.
- add diagnostics to lib::variant to indicate expected and actual payload type
- attempt to fix with boost::lexical_cast; this is insufficient, since
you'd expect such a function to understand "true" and "false" etc.
Moreover, raising this exception causes emergency shutdown, which
flounders due to triggering a ZombieCheck. Interesting.
The very backbone structure of the Lumiera UI, the UI-Bus is now fully defined
and proven to be operative, including asynchronous dispatch of messages
an a generic notification mechanism
A communication chain, triggered from a button in a non-modal dialog box,
passing invocation into another thread, dispatched by the ProcDispatcher,
then again passing thread boundaries to push a response back into the UI.
This is a milestone, and integrates several components built during the last years.
