Especially for the BlockFlow allocator, sanity checks are elided
for performance reasons; yet, generally speaking, it can be a very bad idea
to "optimise" away sanity checks. Thus an additional adaptor is provided
to layer such checks on top of an existing core; and IterEplorer now
always wires in this additional adaptor, and so the original behaviour
is now restored in this respect (and for the largest part of the code base)
While at first sight just a superficial variation of the existing IterStateWrapper,
it became clear with the evolution of the IterExplorer framework that
this setup represents a distinct concept, and especially lends itself
for complex and cohesive collaboration in a layered pipeline. Which
may, or may not be a good idea, depending on the circumstances.
Now, for the implementation of the scheduler memory allocation scheme,
another twist is added to the picture: we can not effort the sanity checks
on each access, even more so when layering / adapting iterators, where
it is essential that the optimiser can remove all unnecessary warts.
Library: add "obvious" utility to the IterExplorer, allowing to
materialise all contents of the Pipeline into a container
...use this to take a snapshot of all currently active Extent addresses
Using a Storage* within a wrapper as "pos" will work,
but is borderline trickery, since it amounts to subverting
the idea behind IterAdapter (which is to encapsulate a target
pointer with some control-logic in the managing container).
Using the same storage size and implementation overhead,
it is much more straight-forward to package the complete
iteration logic into a »State Core«, which in this case
however maintains a back-link to the ExtentFamily.
Iteration should just yield an Reference to an Extent,
thereby hiding all details of the actual raw storage (char[]).
This can be achieved by usind a wrapper type around a pointer
into the managing vector; from this pointer we may convert
into a vector::iterator with the trick described here
https://stackoverflow.com/a/37101607/444796
Furthermore, continued planning of the Activity-Language,
basically clarified the complete usage scenario for now;
seems all implementable right away without further difficulties
- the idea is to use slot-0 in each extent for administrative metadata
- to that end, a specialised GATE-Activity is placed into slot-0
- decision to use the next-pointer for managing the next free slot
- thus we need the help of the underlying ExtentFamily for navigating Extents
Decision to refrain from any attempt to "fix" excessive memory usage,
caused by Epochs still blocked by pending IO operations. Rather, we
assume the engine uses sane parametrisation (possibly with dynamic adjustment)
Yet still there will be some safety limit, but when exceeding this limit,
the allocator will just throw, thereby killing the playback/render process
The second design from 2017, based on a pipeline builder,
is now renamed `TreeExplorer` ⟼ `IterExplorer` and uses
the memorable entrance point `lib::explore(<seq>)`
✔
after completing the recent clean-up and refactoring work,
the monad based framework for recursive tree expansion
can be abandoned and retracted.
This approach from functional programming leads to code,
which is ''cool to write'' yet ''hard to understand.''
A second design attempt was based on the pipeline and decorator pattern
and integrates the monadic expansion as a special case, used here to
discover the prerequisites for a render job. This turned out to be
more effective and prolific and became standard for several exploring
and backtracking algorithms in Lumiera.
This very deep change (which requires almost complete rebuild)
was prompted by the need to process an object (JobPlanning),
which holds several references and is thus move-only, in the
middle of a complex processing pipeline with child expansion.
If this works out well, a long-standing and obnoxious problem
with transforming iterators would be solved, albeit by incurring
a (presumably small) performance overhead, since now the new
value is no longer *assigned*, but rather the existing payload
is destroyed and a new instance is copy/move constructed into
the inline buffer.
The primary purpose (and widely used in Lumieara) is to have a
Lambda create a new Object, which is then returned by value
and thus immediately moved into this inline buffer, where it
resides for further use (as long as the enclosing pipeline
stays alive). Unless such an object does very elaborate
allocations and registrations behind the scene, the
expense of assigning vs creating should be the same.
- had to fix a logical inconsistency in the underlying Expander implementation
in TreeExplorer: the source-pipeline was pulled in advance on expansion,
in order to "consume" the expanded element immediately; now we retain
this element (actually inaccessible) until all of the immediate
children are consumed; thus the (visible) state of the PipeFrameTick
stays at the frame number corresponding to the top-level frame Job,
while possibly expanding a complete tree of flexible prerequisites
This test now gives a nice visualisation of the interconnected states
in the Job-Planning pipeline. This can be quite complex, yet I still think
that this semi-functional approach with a stateful pipeline and expand functors
is the cleanest way to handle this while encapsulating all details
`steam/engine/mock-dispatcher.hpp |cpp` now integrates this
''complete mock setup for render jobs and frame dispatching.''
The exising `DummyJob` has been slightly adapted and renamed
to `MockJob` and is tightly integrated with the other mocks.
The implementation of a `MockDispatcher` necessitated to change
the use of `MockJobTicket`. The initial attempts used a complete
mock implementation, but this approach turned out not to be viable.
Instead — based on the ideas developed for the mock setup —
now the prospective real implementation of `JobTicket` is available
and will be used by the mock setup too. Instead of a synthetic spec,
now a setup of recursively connected `ExitNode`(s) is used; the latter
seems to develop into some kind of Facade for the render node network.
Based on this mock setup, we can now demonstrate the (mostly) complete
Job-Planning pipeline, starting from a segmentation up to render jobs,
and verify proper connectivity and job invocation.
✔
...ouch this was insidious: the STL implementation for list does not
return a pointer to the element just allocated, but rather retrieves
and dereferences the back() / front() iterator after returning from emplace_back|front()
...which in case of re-entrant allocations is something wildly different
than the initial allocation. Thus a *cheap* and dirty placeholder implementation
just using a STL container is not possible, and we need at least
to code up likewise cheesy placeholder implementation by hand.
- separate allocation and ctor all
- use an inline buffer in the STL container
- explicitly handle ctor failures to discard allocation
- NOT THREADSAFE and likely WASTFUL in terms of performance
==> MockSupport_test now back to GREEN after complete refactoring
...by defining a new scheme for access to custom allocators
...and then passing a reference to such an accessor into the
JobTicket ctor, thereby allowing the ticket istelf recursively
to place further JobTicket instances into the allocation space
--> success, test passes (finally)
...hard to tackle...
The idea is to wrap the TreeExplorer builder, so that our specific
builder functions can delegated to the (inherited) generic builder functions
and would just need to supply some cleverly bound lambdas. However,
resulting types are recursive, which does not play nice with type inference,
and working around that problem leads to capturing a self reference,
which at time of invocation is already invalidated (due to moving the
whole pipeline into the final storage)
...which leads to the next daunting problems:
- we need some mocked ModelPort and DataSink placeholders
- we need a way how to inherit from a partial TreeExplorer pipeline
...introduced in preparation for building the Dispatcher pipeline,
which at its core means to iterate over a sequence of frame positions;
thus we need a way to stop rendering at a predetermined point...
several years ago, it seemed like a good idea to incorporate
the link between nominal time and wall-clock time into a dedicated
anchor point, which also regulates the continued frame planning.
But it turned out that such a design mixes up several concepts
and introduces confusion regarding the meaning of "real time"
- latency can not be reasonably defined for a whole planning chunk
- skipping or sliding due to missed deadlines can not reasonably handled
within such an abstract entity; it must be handled rather at the
level of a playback process
- linking the frame grid generation directly to a planning chunk
undercuts the possible abstraction of a planning pipeline
The prototypical setup of data structures and test support components
is largely complete by now — with the exception of the `MockDispatcher`,
which will be completed while moving to the next steps pertaining the
setup of a frame dispatch pipeline.
* the existing `DummyJob` was augmented to allow verification of
association between Job and `JobTicket`
* the existing implementation of `JobTicket` was verified and augmented
to allow coverage of the whole usage cycle
* a `MockJobTicket` was implemented on top, which can be generated
from a symbolical test specification (rather than from the real
Fixture data structure)
* a complete `MockSegmentation` was developed, allowing to establish
all the aforementioned data structures without an actual backing
Render Engine. Moreover, `MockSegmentation` can be generated
from the aforementioned symbolic test specification.
* as part of this work, an algorithm to split an existing Segmentation
and to splice in new segments was developed and verified
...which uncovers further deeply nested problems,
especially when referring to non-copyable types.
Thus need to construct a common type that can be used
both to refer to the source elements and the expanded elements,
and use this common type as result type and also attempt to
produce better diagnostic messages on type mismatch....
...the improved const correctness on STL iterators uncovered another
latent problem with out diagnositc format helper, which provide
consistently rounded float and double output, but failed to take
CV-qualifiaction into account
This is a subtle and far reaching fix, which hopefully removes
a roadblock regarding a Dispatcher pipeline: Our type rebinding
template used to pick up nested type definitions, especially
'value_type' and 'reference' from iterators and containers,
took an overly simplistic approach, which was then fixed
at various places driven by individual problems.
Now:
- value_type is conceptually the "thing" exposed by the iterator
- and pointers are treated as simple values, and no longer linked
to their pointee type; rather we handle the twist regarding
STL const_iterator direcly (it defines a non const value_type,
which is sensible from the STL point of view, but breaks our
generic iterator wrapping mechanism)
...in an attempt to resolve the deeply nested problems encountered
while building an iterator pipeline for the Dispatcher. It seems
that I was sloppy some years ago and just "bashed them into submission",
thereby mixing up two different meanings of "value_type"
Moreover I seemingly implemented the same helper trait template twice,
so the first step is to switch all usages to meta::TypeBinding
To complete the mock setup, the next step would be to extend the GenNode-based spec langage
to allow defining prerequisite Mock-JobTickets. Setting this up seems rather straight forward --
however, defining a simple testcase to cover this extension runs into surprisingly tricky problems..
- for one, the singleValIterator from Itertools has serious difficulties handling references
- but even more surprising, it seems impossible to make the "prerequisites iterator"
fit into the Tree-Explorer framework (which I intend to use as replacement
for the monadic approach)
after some extended analysis of generic types and template instances,
it seems that not TreeExplorer as such is the primary problem, but rather
there is a conceptual mismatch somewhere deep down in Itertools or Iter-Adapter
By reasoning and analysis I conclude that the differentiation into
multiple channels is likely misplaced in JobTicket; it belongs ratther
into the Segment and should provide a suitable JobTicket for each ModelPort
Handling of prerequisites also needs to be reshaped entirely after
switching to a pipeline builder for the Job-planning pipeline; as
preliminary access point, just add an iterator over the immediate
prerequisites, thereby shifting the exploration mechanism entirely
out of the JobTicket implementation
- only the parts actually touched by the algo will be re-allocated
- when a segment is split, the clone copies carry on all data
Library: add function to check for a bare address (without type info)
This macro has turned out to be quite useful in cases
where a generic setup / algorithm / builder need to be customised
with λ adaptors for binding to local or custom types. It relies
on the metafunctions defined in lib/meta/function.hpp to match
the signature of "anything function-like"; so this seems the
proper place to provide that macro alongside
...this is something I should have done since YEARS, really...
Whenever working with symbolically represented data, tests
typically involve checking *hundreds* of expected results,
and thus it can be really hard to find out where the
failure actually happens; it is better for readability
to have the expected result string immediately in the
test code; now this expected result can be marked
with a user-defined literal, and then on mismatch
the expected and the real value will be printed.
There are 12 distinct cases regarding the orientation of two intervals;
The Segmentation::splitSplice() operation shall insert a new Segment
and adjust / truncate / expand / split / delete existing segments
such as to retain the *Invariant* (seamless segmentation covering
the complete time axis)
- can now create a Job from JobTicket::NIL
- on invocation this Job will to nothing
Only when the first real output backend is implemented,
we can decide if this simplistic implementation is enough,
or if an empty output must be explicitly generated...
* using a simplified preliminary implementation of hash chaining (see #1293)
* simplistic implementation of hashing for time values (half-rotation)
* for now just hashing the time into the upper part of the LUID
Maybe we can even live with that implementation for some time,
depending on how important uniform distribution of hash values is
for proper usage of the frame cache.
Needless to say, various further fine points need more consideration,
especially questions of portability (32bit anyone?). Moreover, since
frame times are typically quantised, the search space for the hashed
time values is drastically reduced; conceivably we should rather
research and implement a good hash function for 128bit and then combine
all information into a single hash key....
...using the MockJobTicket setup as point of reference,
since the actual invocation of render nodes will only be drafted
later in this "Vertical Slice" integration effort...
...requires a first attempt towards defining a `JobTiket`.
This turns out quite tricky, due to using those `LinkedElements`
(intrusive single linked list), which requires all added records
actually to live elsewhere. Since we want to use a custom allocator
later (the `AllocationCluster`), this boils down to allocating those
records only when about to construct the `JobTicket` itself.
What makes matters even worse: at the moment we use a separate spec
per Media channel (maybe these specs can be collapsed later non).
And thus we need to pass a collection -- or better an iterator
with raw specs, which in turn must reveal yet another nested
sequence for the prerequisite `JobTickets`.
Anyhow, now we're able at least to create an empty `JobTicket`,
backed by a dummy `JobFunctor`....
Looks like we'll actually retain and use this low-level solution
in cases where we just can not afford heap allocations but need
to keep polymorphic objects close to one another in memory.
Since single linked lists are filled by prepending, it is rather
common to need the reversed order of elements for traversal,
which can be achieved in linear time.
And while we're here, we can modernise the templated emplacement functions
- decision: the Monad-style iteration framework will be abandoned
- the job-planning will be recast in terms of the iter-tree-explorer
- job-planning and frame dispatch will be disentangled
- the Scheduler will deliberately offer a high-level interface
- on this high-level, Scheduler will support dependency management
- the low-level implementation of the Scheduler will be based on Activity verbs
This finishes a long lasting effort to rework the top-level of the Lumiera GTK UI,
to adapt to GTK-3 and the new asynchronous message based architecture.
Special credits and thanks to
* Joel Holdsworth
* Stefan Kangas
Without their relentless foundational work, the Lumiera UI could
never be where it is now. Even if some code was rewritten and several
parts of the old GTK-2 implementation are now obsolete, numerous ideas
solutions and inspirations were drawn from those early contributions
and live on as part of the reworked GUI.
It is now tied to the start of ZoomWindow::overallSpan(),
thereby defining the (technical) pixel coordinates within the window
and for drawing on the canvas to be always positive. Whenever ZoomWindow
re-calibrates, it's change signal will trigger, causing the
TimelineLayout to perform a new DisplayEvaluationPass,
which in turn prompts all embedded widgets to readjust
their positions accordingly.
