* based on reproducible data in `TestFrame`
* using Murmur64A hash-chaining to »mark« with a parameter
This emulates the simplest case of 1:1 processing and can also be applied ''in-place''
For simplified tests there is a helper function to attain a reference to some `TestFrame` data, created on-demand and maintained in a repository in heap memory.
This storage has now be switched to `std::deque`
* provided addresses are stable
* less memory waste
__note__: `TestFrame::reseed()` will discard this repository, and draw a new (reproducible) seed.
Since each `TestFrame` now has a metadata header,
we can store an additional data checksum there,
so that it is now possible both to detect if data
is in pristine state, or if it matches a changed state
recorded in the additional checksum.
So we have now three different levels of verification
isSane:: consistent metadata header found
isValid:: metadata header found and checksum there matches data
isPristine:: in addition, the data is exactly as generated from the `(frameNr,family)`
Change data layout to place a metadata record ''behind the'' payload data,
and add a checksum to allow for validating dummy calculations and also
detect data corruption on data modified after initial generation.
By virtue of a marker data word, the presence of a valid metadata record can be confirmed.
Based on the recent work it is now possible to generate reproducible yet randomly distributed data content.
A new `TestFrame::reseed()` operation is introduced, which attaches to the `lib::defaultGen`
Using the linear-congruential engine for the actual data generation.
* Lumiera source code always was copyrighted by individual contributors
* there is no entity "Lumiera.org" which holds any copyrights
* Lumiera source code is provided under the GPL Version 2+
== Explanations ==
Lumiera as a whole is distributed under Copyleft, GNU General Public License Version 2 or above.
For this to become legally effective, the ''File COPYING in the root directory is sufficient.''
The licensing header in each file is not strictly necessary, yet considered good practice;
attaching a licence notice increases the likeliness that this information is retained
in case someone extracts individual code files. However, it is not by the presence of some
text, that legally binding licensing terms become effective; rather the fact matters that a
given piece of code was provably copyrighted and published under a license. Even reformatting
the code, renaming some variables or deleting parts of the code will not alter this legal
situation, but rather creates a derivative work, which is likewise covered by the GPL!
The most relevant information in the file header is the notice regarding the
time of the first individual copyright claim. By virtue of this initial copyright,
the first author is entitled to choose the terms of licensing. All further
modifications are permitted and covered by the License. The specific wording
or format of the copyright header is not legally relevant, as long as the
intention to publish under the GPL remains clear. The extended wording was
based on a recommendation by the FSF. It can be shortened, because the full terms
of the license are provided alongside the distribution, in the file COPYING.
⚠ __This is a problematic decision__
It temporarily **breaks compatibility with 32bit** until this issue is resolved.
== Explanation ==
Lumiera relies on a mix of the Standard library and Lib-Boost for calculation of hash values.
Before C++11, the Standard did not support and hashtable implementation; meanwhile, we
got several hash based containers in the STL and a framework for hashes,
which unfortunately is incomplete and cumbersome to use.
The C++ Committee has spend endless discussions and was not able to settle
on a convincing solution without major drawbacks regarding one aspect or the other.
This situation is problematic, since Lumiera relies heavily on the technique
of building stable systematic identifiers based on chained hash values.
It is thus essential to use a strong, reliable and portable hash function.
But unfortunately...
* the standard-fallback solution is known to be weak.
* Lib-Boost automatically uses stronger implementations for 64bit systems
* this implies that Hash-Values **are non-portable**
As the Lumiera project currently has no developer time to expend on such a
difficult and deep topic of fundamental research, today I decided to go down
the path of least resistance and **effectively abandon any system
that can not compile and use the 64bit `hash_combine` implementation.
This changeset extracts code from Lib-Boost 1.67 and adds a static assertion
to **break compilation** on non-64bit-platforms (whatever this means)
* most usages are drop-in replacements
* occasionally the other convenience functions can be used
* verify call-paths from core code to identify usages
* ensure reseeding for all tests involving some kind of randomness...
__Note__: some tests were not yet converted,
since their usage of randomness is actually not thread-safe.
This problem existed previously, since also `rand()` is not thread safe,
albeit in most cases it is possible to ignore this problem, as
''garbled internal state'' is also somehow „random“
...to the base-class of all tests
* `seedRand()` shall be invoked by every test using randomisation
* it will draw a new seed for the implicit default-PRNG
* it will document this seed value
* but when a seed was given via cmdline, it will inject that instead
* `makeRandGen()` will create a new dedicated generator instance,
attached (by seeding) to the current default-PRNG
It is not clear yet how to pass the actual `SeedNucleus`, which
for obvious reasons must be maintained by the `test::Suite`
This is the first step towards a »Test Domain Ongology« #1372,
which is a systematic arrangement of test-dummy functionality assumed
to mirror the actual media processing functionality present in external libs.
Each media-processing library not only provides functions to crunch data,
but also establishes a framework of entities and classification to determine
what »media« is an how it is structured and can be generated, transformed
and qualified. Since a essential goal for Lumiera is to be **library agnostic,**
it is important to avoid naïvely to take some popular library's choices
as universal truth regarding structure and nature of »media« as such.
Rather, the architecture of the Lumiera Render Engine must be kept
sufficiently open to accommodate the working style of various libraries,
even ones not known today.
To validate this architectural openness, we use a set of test functions
unrelated to any existing library to validate access to and usage of
rendering functionality — followed by further steps to adopt existing
popular libraries like **FFmpeg** or **Gstreamer**, without tilting
the basic structure of the Render Engine one way or the other.
showing the Node-symbol and a reduced rendering of
either the predecessor or a collection of source nodes.
For this we need functionality to traverse the node graph depth-first
and collect all leaf nodes (which are the source nodes without predecessor);
such can be implemented with the help of the expandAll() functionality
of `lib::IterExplorer`. In addition we need to collect, sort and deduplicate
all the source-node specs; since this is a common requirement, a new
convenience builder was added to `lib::IterExplorer`
...taking into account the prospecive usage context
where the builder expressions will be invoked from within
a media-library plug-in, using std::string_view to pass
the symbolic information seems like a good fit, because
the given spec will typically be assembled from some
building blocks, and thus in itself not be literal data.
Building a precise Frame Cache is a tough job, and is doomed to fail
when attempting to tie cache invalidation to state changes. The only
viable path is to create a system of systematic tagging of processing
steps, and use this as foundation for chained hash values, linked
in accordance to the actual processing structure.
This is complicated by the secondary concern of maintaining memory efficacy
for the render node model, which can be expected to grow to massive scale.
And even while this invocation can not be fully devised right now,
an attempt can be made to build a foundation that is not outright
wasteful, by detaching the logical information from the specific
weaving pattern used for implementation, and by minimising the
representation in memory and computing the compound information
on-demand....
The immediate next goal is to verify properties of render nodes
generated by the builder framework; two kinds of validations
can be distinguished
* structural aspects of the wiring
* the fact that processing functionality is invoked in proper order
Looking into the structural aspects brings about the necessity
to identify the actual processing function bound into some functor.
Some recapitulation of goals and requirements revealed, that this
can not be a merely technical identity record — because the intention
is to base the ''cache key'' on chained processing node identities,
so that the key is stable as long as the user-visible results will be
equivalent. And while structural data can be aggregated, at the
core this information must be provided by the scheme embedded
into the domain ontology, which is tasked with invoking the
builder in order to implement a ''specific processing-asset''
Review the achievements from the last days and map out the further path
for test-driven build-up of a render-node network and invocation.
Notably ''several layers of prototyping'' are in the works now;
it is important to understand the purpose of each such round of
prototyping and to draw the necessary conclusions after closing out.
The next topic to investigate relates to the ''identity'' of nodes and
ports within nodes; this entails to generate a ''symbolic spec'' that
can be verified and used as base for a systematic hash-ID and cache-key...
Since it would in fact be possible to access and write beyond the configured storage,
simply by using the builder API without considering consistency,
it seems advisable to use explicit runtime checks here, instead of
only assertions, and to throw an exception when violating bounds.
Moreover, unsuccessfully attempted to better arrange the functionality
between PortBuilder and WeavingBuilder; seemingly we have an rather tight
coupling here, and also the expectations regarding the processing function
seem to be too tight (but that's the reason why it's an prototype...)
- the chaining constructor is picked reliably when the
slicing is done by a direct static_cast
- the function definition can be passed reliably in all cases
after it has been ''decayed,'' which is done here simply by
taking it by-value. This is adequate, since the function
definition must be copied / inlined for each invocation.
With these fixes, the simplest test case now for the first time
**runs through without failure**
This change allows to disentangle the usages of `lib::SeveralBuilder`,
so that at any time during the build process only a single instance is
actively populated, all in one row — and thus the required storage can
either be pre-allocated, or dynamically extended and shrinked (when
filling elements into the last `SeveralBuilder` currently activated)
By packaging into a λ-closure, the building of the actual `Port`
implementation objects (≙ `Turnout` instances) is delayed until the
very end of the build process, and then unloaded into yet another
`lib::Several` in one strike. Temporarily, those building functor
objects are „hidden“ in the current stack frame, as a new `NodeBuilder`
instance is dropped off with an adapted type parameter (embedding the
λ-type produced by the last nested `PortBuilder` invocation, while
inheriting from previous ones.
However, defining a special constructor to cause this »chaining«
poses some challenge (regarding overload resolution). Moreover,
since the actual processing function shall be embedded directly
(as opposed to wrapping it into a `std::function`), further problems
can arise when this function is given as a ''function reference''
...and as expected, this turns up quite some inconsistencies,
especially regarding usage of the »buffer types«.
Basically, the `PortBuilder` is responsible for the high-level functionality
and thus must ensure the nested `WiringBuilder` is addressed and parameterised
properly to connect all »slots« of the processing function.
- can use a helper function in the WiringBuilder to fill in connections
- but the actual buffer types passed over these connectinos are totally
unchecked at that level, and can not see yet how this danger can be
mitigated one level above, where the PortBuilder is used.
- it is still unclear what a »buffer type« actually means; it could
be the pointer type, but it could also imply a class or struct type
to be emplaced into the buffer, which is a special extension to the
`BufferProvider` protocol, yet seems to be used here rather to transport
specific data types required by the actual media handling library (e.g. FFmpeg)
__Analysis__: what kind of verifications are sensible to employ
to cover building, wiring and invocation of render nodes?
Notably, a test should cover requirements and observable functionality,
while ''avoiding direct hard coupling to implementation internals...''
__Draft__: the most simple node builder invocation conceivable...
Code clean-up: mark all buffers with a dedicated tagging type
The point in question is: if we work the LocalTag into the type-hash,
could it be possible to miss an existing entry in the metadata registry?
This could cause two entries to be locked for a single buffer address,
leading to data corruption.
As far as I can see, in the current usage this would not happen,
but unfortunately this problem can not be ruled out, since the BufferProvider
API and protocol is designed to be open for various usage patterns.
However, the same potentially disastrous pattern could also materialise
when registering two different buffer types, and then locking each
for the same buffer location.
...this is a surprisingly tricky issue, since it undercuts the
generic and recursive implementation of buffer handling;
fortunately I've foreseen such demands may arise down the road
and I've reserved an »Local Key« (now renamed into `LocalTag`),
whose meaning is implementation defined and interpreted by
the specific `BufferProvider`
It became clear that a secondary system of connections must be added,
running top-down from a global model context, and thus contrary to the
regular orientation of the node network, which connects upwards from
predecessor to successor, in accordance with the pull principle.
If we accept this wiring as part of the primary structure, it can be
established immediately while building the nodes, thus adding a preconfigured
''pattern of Buffer Descriptors'' to each node, since there is no further
''moving part'' — beyond the wiring to the `BufferProvider`, which thus
becomes part of a global `ModelContext`
As an immediate consequence, the storage for this configuraion should
also be switched to `lib::Several` and handled similar to the primary
node wiring in the Builder...
...especially what is necessary to represent at this level and what information
is implicit; notably there will be an implicit default wiring, but we allow
for case-by-case deviations
To escape a possible deadlock in analysis, I resort to developing
some kind of free-wheeling presupposition how the **Builder** could
be implemented — a centrepiece of the Lumiera architecture envisioned
thus far — which ''unfortunately'' can only be planned and developed
in a more solid way ''after'' the current »Vertical Slice« is completed.
Thus I find myself in the uncomfortable situation of having to work towards
a core piece, which can not yet be built, since it relies heavily on
the very structures to be built...
...and this line of analysis brings us deep into the ''Buffer Provider''
concept developed in 2012 — which appears to be very well to the point
and stands the test of time.
Adding some ''variadic arguments'' at the right place surprisingly leads
to an ''extension point'' — which in turn directly taps into the
still quite uncharted territory interfacing to a **Domain Ontology**;
the latter is assumed to define how to deal with entities and relationships
defined by some media handling library like e.g. FFmpeg.
So what we're set to do here is actually ''ontology mapping....''
The immediate next step is to build some render nodes directly
in a test setting, without using any kind of ''node factory.''
Getting ahead with this task requires to identify the constituents
to be represented on the first code layer for the reworked code
(here ''first layer'' means any part that are ''not'' supplied
by generic, templated building blocks).
Notably we need to build a descriptor for the `FeedManifold` —
which in turn implies we have to decide on some fundamental aspects
of handling buffers in the render process.
To allow rework of the `ProcNode` connectivity, a lot of presumably obsoleted
draft code from 2011 has to be detached, to be able to keep it in-tree
for further reference (until the rework and refactoring is settled).
As outlined in #1367, the integration effort requires some rework
of existing code, which will be driven ahead by the `NodeLinkage_test`
* redefine Node Connectivity
* build simple `ProcNode` directly in scope
* create an `TurnoutSystem` instance
* perform a ''dummy Node-Invocation''
...these features are now used quite regularly,
and so a dedicated documentation test seems indicated.
Actually my intention is to add a tracking allocator to these test helpers
(and then to use that to verify the custom allocator usage of `lib::Several`)
- the starting point is the idea to build a dedicated ''turnout system''
- `StateAdapter`, `BuffTable` ⟶ `FeedManifold` and _Invocation_ will be fused
- actually, the `TurnoutSystem` will be ''pulled'' and orchestrate the invocation
- the structure is assumed to be recursive
The essence of the Node-Invocation, as developed 2009 / 2011 remains intact,
yet it will be organised along a clearer structure
Facing quite some difficulties here, since there are (at least)
two abandoned past efforts towards building a render node network
in the code base; the structure and architecture decisions from these
previous attempts seem largely valid still, yet on a technical level,
the style of construction evolved considerably in the meantime. Moreover,
these old fragments of code, written during the early stages of the
project, were lacking clear goals and anchor points at places;
the situation is quite different now in this respect.
Sticking to well proven practice, the rework will be driven by a test setup,
and will progress over three steps with increasing levels of integration.
In the Lumiera code base, we use C-String constants as unique error-IDs.
Basically this allows to create new unique error IDs anywhere in the code.
However, definition of such IDs in arbitrary namespaces tends to create
slight confusion and ambiguities, while maintaining the proper use statements
requires some manual work.
Thus I introduce a new **standard scheme**
* Error-IDs for widespread use shall be defined _exclusively_ into `namespace lumiera::error`
* The shorthand-Macro `LERR_()` can now be used to simplify inclusion and referral
* (for local or single-usage errors, a local or even hidden definition is OK)
doing so would contradict the fundamental architecture,
all kinds of failures and timeouts need to be handled within
Scheduler-Layer-2 rather.
Jobs are never aborted, nor do they need to know if and when they are invoked
The second design from 2017, based on a pipeline builder,
is now renamed `TreeExplorer` ⟼ `IterExplorer` and uses
the memorable entrance point `lib::explore(<seq>)`
✔
after completing the recent clean-up and refactoring work,
the monad based framework for recursive tree expansion
can be abandoned and retracted.
This approach from functional programming leads to code,
which is ''cool to write'' yet ''hard to understand.''
A second design attempt was based on the pipeline and decorator pattern
and integrates the monadic expansion as a special case, used here to
discover the prerequisites for a render job. This turned out to be
more effective and prolific and became standard for several exploring
and backtracking algorithms in Lumiera.
An extended series of refactoring and partial rewrites resulted
in a new definition of the `Dispatcher` interface and completes
the buildup of a Job-Planning pipeline, including the ability
to discover prerequisites and compute scheduling deadlines.
At this point, I am about to ''switch to the topic'' of the `Scheduler`,
''postponing'' the completion of the `RenderDrive` until the related
questions regarding memory management and Scheduler interface are settled.
- allow to configure the expected job runtime in the test spec
- remove link to EngineConfig and hard-wire the engine latency for now
... extended integration testing reveals two further bugs ;-)
... document deadline calculation
This finishes the last series of refactorings; the basic concept
remains the same, but in the initial version we arranged the expander
function in the pipeline to maintain a Tuple (parent, child) for the
JobTickets. Unfortunately this turned out to be insufficient, since
JobTicket is effectively const and responsible for a complete Sement,
so there is no room to memorise a Deadline for the parent dependency.
This leads to the better idea to link the JobPlanning aggregators
themselves by parent-child references, which is possible since the
whole dependency chain actually sits in the stack embedded into the
Expander (in the pipeline)
...in the hope that the Optimiser is able to elide those references entirely,
when (as is here the case) they point into another field of a larger object compound
