...but not yet switched into the main LocationQuery interface,
because that would also break the existing implementation;
recasting this implementation is the next step to do....
...which basically allows us to return any suitable implementation
for the child iterator, even to switch the concrete iteration on each level.
We need this flexibility when implementing navigation through a concrete UI
This is just a temporary solution, until IterSource is properly refactored (#1125)
After that, IterSource is /basically a state core/ and the adaptor will be more or less trivial
- as it stands currently, IterSource has a design problem, (see #1125)
- and due to common problems in C++ with mix-ins and extended super interfaces,
it is surprisingly tricky to build on an extension of IterSource
- thus the idea is to draft a new solution "in green field"
by allowing TreeExplorer to adapt IterSource automatically
- the new sholution should be templated on the concrete sub interface
and ideally even resolve the mix-in-problem by re-linearising the
inheritance line, i.e. replace WrappedLumieraIter by something
able to wrap its source, in a similar vein as TreeExplorer does
...yet I do not want to move all of the traits over into the
publicly visible lib::iter_explorer namespace -- I'm quite happy
with these traits being clearly marked as local internal details
NOTE it just type checks right now,
but since meta programming is functional programming, this means
with >90% probability that it might actually work this way....
...which also happens to include sibling and child iteration;
this is an attempt to reconcile the inner contradictions of the design
(we need both absolute flexibility for the type of each child level iterator
yet we want just a single, generic iterator front-end)
...this was a difficult piece of consideration and analysis.
In the end I've settled down on a compromise solution,
with the potential to be extended into the right direction eventually...
surprise: the standard for-Loop causes a copy of the iterator.
From a logical POV this is correct, since the iterator is named,
it can not just be moved into the loop construct and be consumed.
Thus: write a plain old-fashioned for loop and consume the damn thing.
So the top-level call into util::join(&&) decides, if we copy or consume
several extensions and convenience features are conceivable,
but I'll postpone all of them for later, when actual need arises
Note especially there is one recurring design challenge, when creating
such a demand-driven tree evaluation: more often than not it turns out
that "downstream" will need some information about the nested tree structure,
even while, on the surfice, it looks as if the evaluation could be working
completely "linearised". Often, such a need arises from diagnostic features,
and sometimes we want to invoke another API, which in turn could benefit
from knowing something about the original tree structure, even if just
abstracted.
I have no real solution for this problem, but implementing this pipeline builder
leads to a pragmatic workaround: since the iterator already exposes a expandChildren(),
it may as well expose a depth() call, even while keeping anything beyond that
opaque. This is not the clean solution you'd like, but it comes without any
overhead and does not really break the abstraction.
...so sad.
The existing implementation was way more elegant,
just it discarded an exahusted parent element right while in expansion,
so effectively the child sequence took its place. Resolved that by
decomposing the iterNext() operation. And to keep it still readable,
I make the invariant of this class explicit and check it (which
caught yet another undsicovered bug. Yay!)
instead of building a very specific collaboration,
rather just pass the tree depth information over the extended iterator API.
This way, "downstream" clients *can* possibly react on nested scope exploration
We get conflicting goals here:
- either the child expansion happens within the opaque source data
and is thus abstracted away
- or the actual algorithm evaluation becomes aware of the tree structure
and is thus able to work with nested evaluation contexts and a local stack
...build on top of the core features of TreeExplorer
- completely encapsulate and abstract the source data structure
- build an backtracking evaluation based on layered evaluation
of this abstracted expandable data source
NOTE: test passes compilation, but doesn't work yet
...and there is a point where to stop with the mere technicalities,
and return to a design in accordance with the inner nature of things.
Monads are a mere technology, without explicatory power as a concept or pattern
For that reason
- discard the second expansion pattern implemented yesterday,
since it just raises the complexity level for no given reason
- write a summary of my findings while investigating the abilities
of Monads during this design excercise.
- the goal remains to abandon IterExplorer and use the now complete
IterTreeEplorer in its place. Which also defines roughly the extent
to wich monadic techniques can be useful for real world applications
...it can sensibly only be done within the Expander itself.
Question: is this nice-to-have-feature worth the additional complexity
of essentially loading two quite distinct code paths into a single
implementation object?
As it stands, this looks totally confusing to me...
At that time, our home-made Tuple type was replaced by std::tuple,
and then the command framework was extended to also allow command invocation
with arguments packaged as lib::diff::Record<GenNode>
With changeset 0e10ef09ec
A rebinding from std::tuple<ARGS...> to Types<ARGS> was introduced,
but unfortunately this was patched-in on top of the existing Types<ARGS...>
just as a partial specialisation.
Doing it this way is especially silly, since now this rebinding also kicks
in when std::tuple appears as regular payload type within Types<....>
This is what happened here: We have a Lambda taking a std::tuple<int, int>
as argument, yet when extracting the argument type, this rebinding kicks in
and transforms this argument into Types<int, int>
Oh well.
this leads to either unfolding the full tree depth-first,
or, when expanding eagerly, to delve into each sub-branch down to the leaf nodes
Both patterns should be simple to implement on top of what we've built already...
IterSource should be refactored to have an iteration control API similar to IterStateWrapper.
This would resolve the need to pass that pos-pointer over the abstraction barrier,
which is the root cause for all the problems and complexities incurred here
...but for now the price is that we need to punch a hole into IterAdapter.
And obviously, this is all way to tangled and complex on implementation level.
turns out that -- again -- we miss some kind of refresh after expanding children.
But this case is more tricky; it indicates a design mismatch in IterSource:
we (ab)use the pos-pointer to communicate iteration state. While this might be
a clever trick for iterating a real container, it is more than dangerous when
applied to an opaque source state as in this case. After expanding children,
the pos-pointer still points into the cache buffer of the last transformer.
In fact, we miss an actualisation call, but the IterSource interface does not
support such a call (since it tries to get away with state hidden in the pos pointer)
as it turned out, when "inheriting" ctors, C++14 removes the base classes' copy ctors.
C++17 will rectify that. Thus for now we need to define explicitly that
we'll accept the base for initialising the derived. But we need do so
only on one location, namely the most down in the chain.
Since this now requires to import iter-adapter-stl.hpp and iter-source.hpp
at the same time, I decided to drop the convenience imports of the STL adapters
into namespace lib. There is no reason to prefer the IterSource-based adapters
over the iter-adapter-stl.hpp variants of the same functionality.
Thus better always import them explicitly at usage site.
...actual implementation of the planned IterSource packaging is only stubbed.
But I needed to redeclare a lot of ctors, which doesn't seem logical
And I get a bad function invocation from another test case which worked correct beforehand.
We need a way for higher layers to discard their caching and re-evaluate,
once some expansion layer was invoked to replace the current element with
its (functionally defined) "children" -- otherwise the first child will
remain obscured by what was there beforehand.
Solution is to pass such manipulation calls through the full chain of
decorators, allowing them to refresh themselves when necessary. To achieve
that technially, we add a base layer to absorb any such call passed down
through the whole decorator chain -- since we can not assume that the
parent, the original source core implements those manipualation calls
like expandChildren()
Considering the fact that we are bound to introduce yet another iteration control function,
because there is literally no other way to cause a refresh within the IterTreeExplorer-Layers,
it is indicated to reconsider the way how IterStateWrapper attaches to the
iteration control API.
As it turns out, we'll never need an ADL-free function here;
and it seems fully adequate to require all "state core" objects to expose
the API as argument less member function. Because these reflect precisely
the contract of a "state core", so why not have them as member functions.
And as a nice extra, the implementation becomes way more concise in
all the cases refactored with this changeset!
Yet still, we stick to the basic design, *not* relying on virtual functions.
So this is a typical example of a Type Class (or "Concept" in C++ terminology)
good news: it (almost) works out-of-the-box as expected.
There is only one problem: expandChildren() alters the content of the
data source, yet downstream decorators aren't aware of that fact and
continue to present cached evaluations, until the next iterate() call
is issued. Yet unfortunately this iterate already consumes the first
of the expanded children, which thus gets shadowed by the cached
outcome of parent node already consumed and expanded at that point
See the first example:
"10-8-expand-8-4-2-6-4-2"
should be 6 ^^^
...which happens to be supported out of the box,
due to the generic adaptor magic shared with the explore-operation
Exploiting this feature, some functor could even subvert the layering order
- always layer the TreeExplorer (builder) on top of the stack
- always intersperse an IterableDecorator in between adjacent layers
- consequently...
* each layer implementation is now a "state core"
* and the source is now always a Lumiera Iterator
This greatly simplifies all the type rebindings and avoids the
ambiguities in argument converison. Basically now we can always convert
down, and we just need to pick the result type of the bound functor.
Downside is we have now always an adaptation wrapper in between,
but we can assume the compiler is able to optimise such inline
accessors away without overhead.
...yet this seems like a rather bad idea,
it breeds various problems and requires arcane trickery to make it fly
==> abandon this design
==> always intersperse an IterableDecorator between each pair of Layers
...especially relevant in the context of TreeExplorer,
where the general understanding is that the "Data Source" (whatever it is)
will be piggy-backed into the pipeline builder, and this wrapping is
conceived as being essentially a no-op.
It is quite possible we'll even start using such pipeline builders
in concert with move-only types. Just consider a UI-navigator state
hooked up with a massive implementation internal pointer tree attached
to all of the major widgets in the UI. Nothing you want to copy in passing by.
As it turned out, we had two bugs luring in the code base,
with the happy result of one cancelling out the adverse effects of the other
:-D
- a mistake in the invocation of the Itertools (transform, filter,...)
caused them to move and consume any input passed by forwarding, instead
of consuming only the RValue references.
- but util::join did an extraneous copy on its data source, meaning that
in all relevant cases where a *copy* got passed into the Itertools,
only that spurious temporary was consumed by Bug #1.
(Note that most usages of Itertools rely on RValues anyway, since the whole
point of Itertools is to write concise in-line transformation pipelines...)
*** Added additional testcode to prove util::stringify() behaves correct
now in all cases.
Obsoletes and replaces the ad-hoc written type rebindings from
iter-adapter and friends. The new scheme is more consistent and does
less magic, which necessitates an additional remove_pointer<IT> within
the iterator adaptors. Rationale is, "pointer" is treated now just as
a primitive type without additional magic or unwrapping, since it is
impossible to tell generically if the pointer or the pointee was
meant to be the "value"
Oh well.
This kept me busy a whole day long -- and someone less stubborn like myself
would probably supect a "compiler bug" or put the blame on the language C++
So to stress this point: the compiler behaved CORRECT
Just SFINAE is dangerous stuff: the metafunction I concieved yesterday requires
a complete type, yet, under rather specific circumstances, when instantiating
mutually dependent templates (in our case lib::diff::Record<GenNode> is a
recursive type), the distinction between "complete" and "incomplete"
becomes blurry, and depends on the processing order. Which gave the
misleading impression as if there was a side-effect where the presence
of one definition changes the meaning of another one used in the same
program. What happened in fact was just that the evaluation order was
changed, causing the metafunction to fail silently, thus picking
another specialisation.
attempt to re-use the same traits as much as possible
NOTE: new code not passing compiler yet, but refactored old code
does, and still passes unit test
...which uncovered an error in the test fixture
plus helped to spot the spurious copy when passing the argument to the expand functor
And my GDB crashed when loading the executable, YAY!
so we'll need to coment out some code from now on,
until we're able to switch to a more recent toolchain (#1118)
...while this implementation works now, it is still very complex and intricate.
I am still doubtful this is a good approach, but well, we need to try that route....
but possible only for the iterator -> iterator case
Since we can not "probe" a generic lambda, we get only one shot:
we can try to bind it into a std::function with the assumed signature
...since all those metaprogramming techniques rely on SFINAE,
but *instantiating* a template means to compile it, which is more
than just substituate a type into the signature
If forming the signature fails -> SFINAE, try next one
If instantiating a template fails -> compile error, abort
Basically we want to support two distinct cases, just by slightly adapting
the invocation of the expansion functor:
Case-1: classical monadic flatMap:
the Functor accepts a value yielded by the source iterator
and builds a new "expaneded" iterator
Case-2: manipulation of opaque implementation state
the Functor knows internal details of the source iterator
and thus takes the source iterator as such as argument,
performs some manipulation and then builds a new sub-iterator
A soulution to reconcile those two distinct cases can be built
with the help of a generic lambda
Here, the tricky question remains, how to relate this evalutaion scheme
to the well known monadic handling of collections and iterators.
It seems, we can not yet decide upon that question, rather we should
first try to build a concrete implementation of the envisioned algorithm
and then reconsider the question later, to what extent this is "monadic"
This can be seen as a side track, but the hope is
by relying on some kind of monadic evaluation pattern, we'll be
able to to reconcile the IterExplorer draft from 2012 with the requirement
to keep the implementation of "tree position" entirely opaque.
The latter is mandatory in the use case here, since we must not intermingle
the algorithm to resolve UI-coordinates in any way with the code actually
navigating and accessing GTK widgets. Thus, we're forced to build some kind
of abstraction barrier, and this turns out to be surprisingly difficult.
...which was deliberately represented in an asymmetric way, to verify the
design's ability to cope with such implementation intricacies. So basically
we have to kick in at LEVEL == 1 and access the implementation differently.
This exercise just shows again, that treating tree structures recursively
is the way to go, and we should do similar when coding up the query-API
for the real GTK toolkit based window elements...
...which can be helpful when a function usually returns a somewhat dressed-up iterator,
but needs to return a specific fixed value under some circumstances
this fixes a silly mistake:
obviously we want named sub-nodes, aka. "Attributes",
but we used the anonymous sub-nodes instead, aka. "Children"
Incidentally, this renders the definitions also way more readable;
in fact the strange post-fix naming notation of the original version
was a clear indication of using the system backwards....
obviously, we get a trivial case, when the path is explicit,
and we need a tricky full blown resolution with backtracking
when forced to interpolate wildcards to cover a given UICoord
spec against the actual UI topology.
Do we need it?
* actually not right now
* but already a complete implementation of the ViewSpec concept
requires such a resolution
...to limit them to the UI-Coordinates themselves,
while declining the possibility to mutate the target environment
through the PathResolver. Better handle changes within the
target environment by dedicated API calls on the target elements,
instead of creating some kind of "universal structure"
After completing the self-contained UICoord data elements,
the next thing to consider might be how to resolve UI coordinates
against an actual window topology. We need to define a suitable
command-and-query interface in order to build and verify this
intricate resolution process separated from the actual UI code.
exploring the idea of a configuration DSL.
As a first step, this could be a simple internal DSL,
implemented as a bunch of static functor objects, which are internally bound
and thus implemented by the ViewLocator within InteractionDirector
...we have to face the problem that we need some generic strategy
for access to component views, which possibly will become customisable.
And the allowed patterns of access are quite different for the various
kind of view we know....
responsible for access and allocation of component views.
Internally wired to the PanelLocator within the global WindowLocator
This setup settles those nasty qeustions of crosswise top-level access
this starts work on a new UI global topic (#1004)
- coin a new term: "view component"
- distinction between veiw component and Panel
- consider how to locate view components
- WindowList becomes WindowLocator
actually I do not know much regarding the actual situation when,
within the Builder run, we're able to detect a change and generate
a diff description. However, as a first step, I'll pick IterSrouce
as a base interface and use a "generation context", which is to be
passed by shared-ptr
the (trivial) implementation turned out to be correct as written,
but it was (again) damn challenging to get the mulithreaded chaotic
test fixture and especially the lambda captures to work correct.
- concept for a first preliminary implementation of dispatch into the UI thread
- define an integration effort to build a complete working communication chain
This change was caused by investigation of UI event loop dispatch;
since the GTK UI is designed to run single threaded, any invocation
from other threads need to be diepatched explicitly.
A possible way to achieve this is to use Glib::Dispatcher, which
in turn requires that the current thread (which is in this case the UI thread)
already holds a Glib::MainContext
This prompted me to create a tight link between the external facade interfaces
of the UI and the event loop itself. What remains to be settled is how
to hand over arguments to the action in the main loop
After investigation of current GTK and GIO code, I came to the conclusion
that we do *not* want to rely on the shiny new Gtk::Application, which
provides a lot of additional "convenience" functionality we do neither
need nor want. Most notably, we do not want extended desktop integration
like automatically connecting to D-Bus or exposing application actions
as desktop events.
After stripping away all those optional functions and extensions, it turns
out the basic code to operate the GTK main event loop is quite simple.
This changeset extracts this code from the (deprecated) Gtk::Main and
integrates it directly in Lumiera's UI framework object (UiManager).
this is just a tiny change to make things more othogonal.
Now the unwinding and calls to any GTK / Widget dtors happen *after*
emitting the term signal from UI shutdown. Which means, the other subsystems
are shutting down (in their dedicated threads) as well, thus lowering
the probability of some action still using the UI and triggering an exception
as it turned out, the former functionality was deactivated in 2009
with changeset 6151415
The whole concept seems to be unfinished, and needs to be reworked
and integrated with "Views and Perspectives" (whatever that is...)
See also #1097
Gtk::Main is deprecated, but the new solution, instantiating a
Gtk::Application object does not match our use case, since we handle
all application concerns already and just need a Gtk main loop to run.
Anyway, it became clear that the "main object" will be the new UiManager.
As a first step, I've now moved the (deprecated) Gtk::Main object
down there. Next step (planned) will be to inherit from Gio::Application
and clone some functionality from Gtk::Application
...which opens more questions than it solves at the moment.
Especially note #1096, the question how to refer to object-IDs
Maybe we need to enable sending EntryIDs via GenNode?
Anyway, the magic spell is broken now: we have a way how to
establish commands and how to issue them from the UI, with full integration
of UI-Bus, layer separation facade, instance management and ProcDispatcher
Looks like a stepping stone
after extended analysis, it turned out to be a "placeholder concept"
and introduces an indirection, which can be removed altogether
- simple command invocation happens at gui::model::Tangible
- it is based on the command (definition) ID
- instance management happens automatically and transparently
- the extended case of context-bound commands will be treated later,
and is entirely self-contained
while the initial design treated the commands in a strictly top-down manner,
where the ID is known solely to the CommandRegistry, this change and information
duplication became necessary now, since by default we now always enqueue and
dispatch anonymous clone copies from the original command definition (prototype).
This implementation uses the trick to tag this command-ID when a command-hanlde
is activated, which is also the moment when it is tracked in the registry.
in accordance to the design changes concluded yesterday.
- in the standard cases we now check the global registry first
- automatically create anonymous clone copy from global commands
- reorganise code internally to use common tail implementation
as it turns out, we can always trigger commands right away,
the moment all arguments are known. Thus it is sufficient to
send a single argument binding message, which allows us to
get rid of a lot or ugly complexities (payload visitor).
It seems more adequate to push the somewhat intricate mechanics
for the "fall back" onto generic commands down into the implementation
level of CommandInstanceManager. The point is, we know the standard
usage situation is to rely on the instance manager, and thus we want
to avoid redundant table lookups, only to support the rare case of
fallback to global commands. The latter is currently used only from
unit-tests, but might in future also be used by scripts.
Due to thread safety considerations, I have refrained from handing
out a direct reference to the command token sitting in the registry,
even while not doing so incurs a small runtime penalty (accessing
the shared ref-count for creating a copy of the smart-handle).
This is the typical situation where you'd be tempted to sacrifice
sanity for the sake of an imaginary performance benefit, which
in fact is dwarfed by all the machinery of UI-Bus and argument
passing via GenNode.
but I am not happy with the implementation yet: the maybeGet just
doesn't feel right. Likely it will be a better idea to push that
fallback mechanism generally down into the CommandInstanceManager?
just by reasoning from the concept, an instance should always correspond
to a single invocation trail. Having several sets of invocation state
compete with each other, means to keep them distinct, otherwise the
implicit state is going to be corrupted
This changeset fixes a huge pile of problems, as indicated in the
error log of the Doxygen run after merging all the recent Doxygen improvements
unfortunately, auto-linking does still not work at various places.
There is no clear indication what might be the problem.
Possibly the rather unstable Sqlite support in this Doxygen version
is the cause. Anyway, needs to be investigated further.
this is indeed a change of concept.
A 'command instance' can not be found through the official
Command front-end anymore, since we do not create a registration.
This allows us to avoid decorating command IDs with running counters
interesting new twist: we do not even need to decorate with a running number,
since we'll get away with an anonymous command instance, thanks to Command
being a smart-handle
this is a prerequisite for command instance management:
We have now an (almost) complete framework for writing actual
command definitions in practice, which will be registered automatically.
This could be complemented (future work) by a script in the build process
to regenerate proc/cmd.hpp based on the IDs of those automatic definitions.
The point in question is how to manage these definitions in practice,
since we're about to create a huge lot of them eventually. The solution
attempted here is heavily inspired by the boost-test framework
...because this topic serves as a vehicle to elaborate various core concepts
of the UI backbone, especially how to access, bind and invoke Proc-Layer commands
...turns out to be a nasty subject, now we're able to see
in more concrete detail how this interaction needs to be carried out.
Basically this is a blocker for the top-level, since it is obviously
some service in top-level, which ultimately becomes responsible for
orchestrating this activity
this pretty much resolves most of the uncertainities:
we now get a set of mutually dependent services, each of which
is aware of each other member's capabilities, but accesses those
only through this partner's API
After quite some pondering, it occured to me that we both
- need some top-level model::Tangible to correspond to the RootMO in the session
- need some Controller to handle globally relevant actions
- need a way to link action invocation to transient interaction state (like focus)
This leads to the introduction of a new top-level controller, which is better
suited to fill that role than the depreacted model-controller or the demoted window-manager
looks like we're in management business here ;-)
we chop off heads, slaughter the holy cows and then install -- a new manager
...allows us to get rid of a lot of sigc boilerplate syntax.
The downside is that the resulting functors are not sigc::trackable.
This seems adequate here, since the whole top-level UI backbone is
maintained by GtkLumiera, and thus ensured to exist as long as the
main GTK event loop is running.
WARNING: beware of creating "wild" background thrads in the UI, without
proper scheduling of any communication via the event loop!
This is a very pervasive change and basically turns the whole top-level
of the GTK-UI bottom-up. If this change turns out right, it would likely
solve #1048
WARNING: in parts not implemented, breaks UI
...which itself is obsolete and needs to be redesigned from scratch.
For now we create a local instance of this obsolete PlaybackController
in each viewer panel and we use a static accessor function to just some
instance. Which would break if we start playback with multiple viewer
panels. But we can't anyway, since the Player itself is also a broken
leftover from an obsoleted design study from the early days.
so why care...
- WindowList (ex WindowManager)
- Project & Controller
the latter ones are defunct and can be replicated down into each
of the old timeline pannel instances. They just serve the purpose
to keep this old code barely functional, so it can be used as reference
for building the new timeline
There seems to be a mismatch in the arrangement of the top-level entities
* we support multiple windows, yet from reading the code, you'd ge the impression we aren't really aware we have multiple top-level windows
* the `WindowManager` is the core UI manager, which feels like a mix-up in concerns
* the `WorkspaceWindow::createUI()` does the global UI initialisation. Again, we have multiple workspace windows.
* `GtkLumiera::main()` creates a `Model` and a `Controller` in local function scope, but stores the `WindowManager` in an object field.
* it seems, for that very reason, `GtlLumiera` needed to be a singleton, to allow by-name access to "the" `WindowManager`
* needless to say, this causes a host of problems when shutting down the UI.
The idea is to introduce a dedicated UiManager, to deal with the central
framework induced concerns solely, and to demote the WindowManager and the
WorkspaceWindows to care only for their local concerns
in fact it just does not fulfil any of the behavioural properties
of a full-fledged UI-Element. All it needs is an uplink bus connection,
so let's just keep it as that
Sidenote: I've realised today that such a "free standing" BusTerm
without registration in Nexus is a good idea and acceptable solution.
yes, it's a cycle and indeed quite tricky.
Just verified it (again) with the debugger and saw all
dtor calls happening in the expected order. Also the number
of Nexus registration is sane
Now I've realised that there are two degrees of connectedness.
It is very much possible to have a "free standing" BusTerm, which
only allows to send uplink messages. In fact, this is how CoreService
is implemented, and probably it should also the way how to connect
the GuiNotification service...
Reason was some insideous detail regarding Lambdas:
When a Lambda captures context, a *closure* is created.
And while the Lambda itself is generated code, pretty much
like an anonymous function, the closure depends on the context
that was captured. In our case here, the Lambda used to start
the thread was the problem: it captured the termCallback functor
from the argument of the enclosing function. In fact it did not
help or change anything if we successively package that lambda
into a function objet and store this by value, because the
lambda still refers to the transient function context present
on stack at the moment it was captured.
The solution is to revert back to a bind expression, since this
creates a dedicated storage for the bound function arguments
managed within the bind-functor. This makes us independent
from the call context
...because some Bus connections stem from elements which are
member of CoreService, thus the'll still be connected when the
sanity check in the dtor runs
But even with this fix, we still get a SEGFAULT
TODO
- is this actually a sensible idea, from a design viewpoint?
- in which way to bind GuiNotification for receiving diff messages?
- Problem with disconnnecting from Nexus on shutdown
Writing and debugging such tests is always an interesting challenge...
Fortunately this exercise didn't unveil any problem in the newly written
code, only some insidious problems in the test fixture itself. Which
again highlights the necessity, that each *command instance* needs
to be an independent clone from the original *command prototype*,
since argument binding messages and trigger messages can appear
in arbitrary order.
