... so this (finally) is the missing cornerstone
... traverse the calculation graph and generate render jobs
... provide a chunk-wise pre-planning of the next batch
... use a future to block the (test) thread until completed
- decided to abstract the scheduler invocations as λ
- so this functor contains the bare loop logic
Investigation regarding hash-framework:
It turns out that boost::hash uses a different hash_combine,
than what we have extracted/duplicated in lib/hash-value.hpp
(either this was a mistake, or boost::hash did use this weaker
function at that time and supplied a dedicated 64bit implementation later)
Anyway, should use boost::hash for the time being
maybe also fix the duplicated impl in lib/hash-value.hpp
- use a dedicated context "dropped off" the TestChainLoad instance
- encode the node-idx into the InvocationInstanceID
- build an invocation- and a planning-job-functor
- let planning progress over an lib::UninitialisedStorage array
- plant the ActivityTerm instances into that array as Scheduling progresses
Introduced as remedy for a long standing sloppiness:
Using a `char[]` together with `reinterpret_cast` in storage management helpers
bears danger of placing objects with wrong alignment; moreover, there are increasing
risks that modern code optimisers miss the ''backdoor access'' and might apply too
aggressive rewritings.
With C++17, there is a standard conformant way to express such a usage scheme.
* `lib::UninitialisedStorage` can now be used in a situation (e.g. as in `ExtentFamily`)
where a complete block of storage is allocated once and then subsequently used
to plant objects one by one
* moreover, I went over the code base and adapted the most relevant usages of
''placement-new into buffer'' to also include the `std::launder()` marker
... special rule to generate a fixed expansion on each seed
... consecutive reductions join everything back into one chain
... can counterbalance expansions and reductions
...as it turns out, the solution embraced first was the cleanest way
to handle dynamic configuration of parameters; just it did not work
at that time, due to the reference binding problem in the Lambdas.
Meanwhile, the latter has been resolved by relying on the LazyInit
mechanism. Thus it is now possible to abandon the manipulation by
side effect and rather require the dynamic rule to return a
''pristine instance''.
With these adjustments, it is now possible to install a rule
which expands only for some kinds of nodes; this is used here
to crate a starting point for a **reduction rule** to kick in.
It seams indicated to verify the generated connectivity
and the hash calculation and recalculation explicitly
at least for one example topology; choosing a topology
comprised of several sub-graphs, to also verify the
propagation of seed values to further start-nodes.
In order to avoid addressing nodes directly by index number,
those sub-graphs can be processed by ''grouping of nodes'';
all parts are congruent because topology is determined by
the node hashes and thus a regular pattern can be exploited.
To allow for easy processing of groups, I have developed a
simplistic grouping device within the IterExplorer framework.
- with the new pruning option, start-Nodes can now be anywhere
- introduce predicates to detect start-Nodes and exit-Nodes
- ensure each new seed node gets the global seed on graph construction
- provide functionality to re-propagate a seed and clear hashes
- provide functionality to recalculate the hashes over the graph
up to now, random values were completely determined by the
Node's hash, leading to completely symmetrical topology.
This is fine, but sometimes additional randomness is desirable,
while still keeping everything deterministic; the obvious solution
is to make the results optionally dependent on the invocation order,
which is simply to achieve with an additional state field. After some
tinkering, I decided to use the most simplistic solution, which is
just a multiplication with the state.
...so this was yet another digression, caused by the desire
somehow to salvage this problematic component design. Using a
DSL token fluently, while internally maintaining a complex and
totally open function based configuration is a bit of a stretch.
For context: I've engaged into writing a `LazyInit` helper component,
to resolve the inner contradiction between DSL use of `RandomDraw`
(implying value semantics) and the design of a processing pipeline,
which quite naturally leads to binding by reference into the enclosing
implementation.
In most cases, this change (to lazy on-demand initialisation) should be
transparent for the complete implementation code in `RandomDraw` -- with
one notable exception: when configuring an elaborate pipeline, especially
with dynamic changes of the probability profile during the simulation run,
then then obviously there is the desire to use the existing processing
pipeline from the reconfiguration function (in fact it would be quite
hard to explain why and where this should be avoided). `LazyInit` breaks
this usage scenario, since -- at the time the reconfiguration runs --
now the object is not initialised at all, but holds a »Trojan« functor,
which will trigger initialisation eventually.
After some headaches and grievances (why am I engaging into such an
elaborate solution for such an accidental and marginal topic...),
unfortunately it occurred to me that even this problem can be fixed,
with yet some further "minimal" adjustments to the scheme: the LazyInit
mechanism ''just needs to ensure'' that the init-functor ''sees the
same environment as in eager init'' -- that is, it must clear out the
»Trojan« first, and it ''could apply any previous pending init function''
fist. That is, with just a minimal change, we possibly build a chain
of init functors now, and apply them in given order, so each one
sees the state the previous one created -- as if this was just
direct eager object manipulation...
...this is a more realistic demo example, which mimics
some of the patterns present in RandomDraw. The test also
uses lambdas linking to the actual storage location, so that
the invocation would crash on a copy; LazyInit was invented
to safeguard against this, while still allowing leeway
during the initialisation phase in a DSL.
...oh my.
This is getting messy. I am way into danger territory now....
I've made a nifty cool design with automatically adapted functors;
yet at the end of the day, this does not bode well with a DSL usage,
where objects appear to be simple values from a users point of view.
- Helper function to find out of two objects are located
"close to each other" -- which can be used as heuristics
to distinguish heap vs. stack storage
- further investigation shows that libstdc++ applies the
small-object optimisation for functor up to »two slots«
in size -- but only if the copy-ctor is trivial. Thus
a lambda capturing a shared_ptr by value will *always*
be maintained in heap storage (and LazyInit must be
redesigned accordingly)...
- the verify_inlineStorage() unit test will now trigger
if some implementation does not apply small-object optimisation
under these minimal assumptions
the RandomDraw rules developed last days are meant to be used
with user-provided λ-adapters; employing these in a context
of a DSL runs danger of producing dangling references.
Attempting to resolve this fundamental problem through
late-initialisation, and then locking the component into
a fixed memory location prior to actual usage. Driven by
the goal of a self-contained component, some advanced
trickery is required -- which again indicates better
to write a library component with adequate test coverage.
...now using the reworked partial-application helper...
...bind to *this and then recursively re-invoke the adaptation process
...need also to copy-capture the previously existing mapping-function
first test seems to work now
Investigation in test setup reveals that the intended solution
for dynamic configuration of the RandomDraw can not possibly work.
The reason is: the processing function binds back into the object instance.
This implies that RandomDraw must be *non-copyable*.
So we have to go full circle.
We need a way to pass the current instance to the configuration function.
And the most obvious and clear way would be to pass it as function argument.
Which however requires to *partially apply* this function.
So -- again -- we have to resort to one of the functor utilities
written several years ago; and while doing so, we must modernise
these tools further, to support perfect forwarding and binding
of reference arguments.
- strive at complete branch coverage for the mapping function
- decide that the neutral value can deliberately lie outside
the value range, in which case the probability setting
controls the number of _value_ result incidents vs
neutral value result incidents.
- introduce a third path to define this case clearly
- implement the range setting Builder-API functions
- absorb boundrary and illegal cases
For sake of simplicity, since this whole exercise is a byproduct,
the mapping calculations are done in doubles. To get even distribution
of values and a good randomisation, it is thus necessary to break
down the size_t hash value in a first step (size_t can be 64bit
and random numbers would be subject to rounding errors otherwise)
The choice of this quantiser is tricky; it must be a power of two
to guarantee even distribution, and if chosen to close to the grid
of the result values, with lower probabilities we'd fail to cover
some of the possible result values. If chosen to large, then
of course we'd run danger of producing correlated numbers on
consecutive picks.
Attempting to use 4 bits of headroom above the log-2 of the
required value range. For example, 10-step values would use
a quantiser of 128, which looks like a good compromise.
The following tests will show how good this choice holds up.
This highly optimised function was introduced about one year ago
for handling of denomals with rational values (fractions), as
an interim solution until we'll switch to C++20.
Since this function uses an unrolled loop and basically
just does a logarithmic search for the highest set bit,
it can just be declared constexpr. Moreover, it is now
relocated into one of the basic utility headers
Remark: the primary "competitor" is the ilogb(double),
which can exploit hardware acceleration. For 64bit integers,
the ilog2() is only marginally faster according to my own
repeated invocation benchmarks.
The first step was to allow setting a minimum value,
which in theory could also be negative (at no point is the
code actually limited to unsigned values; this is rather
the default in practice).
But reconsidering this extensions, then you'd also want
the "neutral value" to be handled properly. Within context,
this means that the *probability* controls when values other
than the neutral value are produced; especially with p = 1.0
the neutral value shall not be produced at all
...since the Policy class now defines the function signature,
we can no longer assume that "input" is size_t. Rather, all
invocations must rely on the generic adaptaion scheme.
Getting this correct turns out rather tricky again;
best to rely on a generic function-composition.
Indeed I programmed such a helper several years ago,
with the caveat that at that time we used C++03 and
could not perfect-forward arguments. Today this problem
can be solved much more succinct using generic Lambdas.
to define this as a generic library component,
any reference to the actual data source moust be extracted
from the body of the implementation and supplied later
at usage site. In the actual case at hand the source
for randomness would be the node hash, and that is
absolutely an internal implementation detail.
The idea is to use some source of randomness to pick a
limited parameter value with controllable probability.
While the core of the implementation is nothing more
than some simple numeric adjustments, these turn out
to be rather intricate and obscure; the desire to
package these technicalities into a component
however necessitates to make invocations
at usage site self explanatory.
...these were developed driven by the immediate need
to visualise ''random generated computation patterns''
for ''Scheduler load testing.''
The abstraction level of this DSL is low
and structures closely match some clauses of the DOT language;
this approach may not yet be adequate to generate more complex
graph structures and was extracted as a starting point
for further refinements....
With all the preceding DSL work, this turns out to be surprisingly easy;
the only minor twist is the grouping of nodes into (time)levels,
which can be achieved with a "lagging" update from the loop body
Note: next step will be to extract the DSL helpers into a Library header
...refine the handling of FrameRates close to the definition bounds
...implement the actual rule to scale allocator capacity on announcement
...hook up into the seedCalcStream() with a default of +25FPS
+ test coverage
...whenever a new CalcStream is seeded, it would be prudent
not only to step up the WorkForce (which is already implemented),
but also to provide a hint to the BlockFlow allocator regarding
the expected calculation density.
Such a hint would allow to set a more ample »epoch« spacing,
thereby avoiding to drive the allocator into overload first.
The allocator will cope anyway and re-balance in a matter of
about 2 seconds, but avoiding this kind of control oscillations
altogether will lead to better performance at calculation start.
The test case "scheduleRenderJob()" -- while deliberately operated
quite artificially with a disabled WorkForce (so the test can check
the contents in the queue and then progress manually -- led to discovery
of an open gap in the logic: in the (rare) case that a new task is
added ''from the outside'' without acquiring the Grooming-Token, then
the new task could sit in the entrace queue, in worst case for 50ms,
until the next Scheduler-»Tick« routinely sweeps this queue. Under
normal conditions however, each dispatch of another activity will
also sweep the entrance queue, yet if there happens to be no other
task right now, a new task could be stuck.
Thinking through this problem also helped to amend some aspects
of Grooming-Token handling and clarified the role of the API-functions.
Use a simple destructor-trick to set up a concise notation
for temporarily manipulating a value for testing.
The manipulation will automatically be undone
when leaving scope
For now, the `EngineObserver` is defined as an empty shell,
outfitted with a low-level binary message dispatch API.
Messages are keyed by a Symbol, which allows evolution of private message types.
Routing and Addressing is governed by an opaque size_t hash.
The `EngineEvent` data base class provides »4 Slots« of inline binary storage;
concrete subclasses shall define the mapping of actual data into this space
and provide a convenience constructor for events.
For use by the Scheduler, a `WorkTiming`-Event is defined based on this scheme;
this allows to implement the λ-work and λ-done of the Scheduler-`ExecutionCtx`.
These hooks will be invoked at begin and end of any render calculations.
...especially to prevent a deadline way too far into the future,
since this would provoke the BlockFlow (epoch based) memory manager
to run out of space.
Just based on gut feeling, I am now imposing a limit of 20seconds,
which, given current parametrisation, with a minimum spacing of 6.6ms
and 500 Activities per Block would at maximum require 360 MiB for
the Activities, or 3000 Blocks. With *that much* blocks, the
linear search would degrade horribly anyway...
WorkForce scales down automatically after 2 seconds when
workers fall idle; thus we need to step up automatically
with each new task.
Later we'll also add some capacity management to both the
LoadController and the Job-Planning, but for now this rather
crude approach should suffice.
NOTE: most of the cases in SchedulerService_test verify parts
of the component integration and thus need to bypass this
automatism, because the test code wants to invoke the
work-Function directly (without any interference
from running workers)
While testing, I repeatedly had SEGFAULT in the new thread-wrapper,
but only when running under debugger. While the language spec guarantees
that exit from the thread handle initialisation synchronizes-with
the start of the new thread, there is no guarantee in the reverse
direction. Here this means that the new thread may not see the
newly initialised thread handle ID at start. Thus I've added
a yield-wait at the very beginning of the new thread function.
Under normal conditions, the startup of a thread takes at least
100 - 500µs and thus I've never seen the problematic behaviour
without debugger. However, adding a yield-wait loop at that point
seems harmless (it typically checks back every 400ns or so).
All real usages of the thread wrapper in the application use
some kind of additional coordination or even a sync barrier
to ensure the thread can pick up all further data before
going into active work.
WARNING: if someone would detach() the thread immediately after
creating it, then this added condition would cause the starting
thread function to hang forever. In our current setup for the
thread wrapper, this is not possible, since the thread handle
is embedded into protected code. The earliest point you could
do that would be in the handle_begin_thread(), which is called
from the thread itself *after* the new check. And moreover,
this would require to write a new variation of the Policy.
While building increasingly complex integration tests for the Scheduler,
it turns out helpful to be able to manipulate the "full concurreency"
as used by Scheduler, WorkForce and LoadController.
In the current test, I am facing a problem that new entries from the
threadsafe entrance queue are not propagated to the priority queue
soon enough; partly this is due to functionality still to be added
(scaling up when new tasks are passed in) -- but this will further
complicate the test setup.
The invocation structure is effectively determined by the
Activity-chain builder from the Activity-Language; but, taking
into account the complexity of the Scheduler code developed thus far,
it seems prudent to encapsulate the topic of "Activities" altogether
and expose only a convenience builder-API towards the Job-Planning
With the previous change, we allways have an execution scope now,
which (among other things) defines a time-window (start,deadline).
However, the entrance point to an Activity-chain, the POST-Activity
also defines a time window, which is now combined with this scope
by maximum / minimum constraining.
The problem with passing the deadline was just a blatant symptom
that something with the overall design was not quite right, leading
to mix-up of interfaces and implementation functions, and more and more
detail parameters spreading throughout the call chains.
The turning point was to realise the two conceptual levels
crossing and interconnected within the »Scheduler-Service«
- the Activity-Language describes the patterns of processing
- the Scheduler components handle time-bound events
So by turning the (previously private) queue entry into an
ActivationEvent, the design could be balanced.
This record becomes the common agens within the Scheduler,
and builds upon / layers on top of the common agens of the
Language, which is the Activity record.
This is the first step to address the conceptual problems identified yesterday,
and works largely as a drop-in replacement. Instead of just retrieving
the Activity*, now the Queue entry itself is exposed to the rest of the
scheduler implementation, augmented with implicit conversion, allowing
all of the tests to remain unaltered (and legible, without boilerplate)
the attempt to integrate additional deadline and significance parameters
unveils a design problem due to the layering of contexts
- the Activity-Language attempts to abstract away the ''Scheduler mechanics''
- but this implementation logic now needs to pass additional parameters
- and notably there is the possibility of direct re-scheduling from within
the Activity-Dispatch
The symptom of this problem is that it's no longer possible
to implement the ExecutionCtx.post() function in the real Scheduler-context
...it is clear that there must be a way to flush the scheduler queues
an thereby silently drop any obsoleted or irrelevant entries. This topic
turns out to be somewhat involved, as it requires to consider the
deadline (due to the memory management, which is based on deadlines).
Furthermore there is a relation to yet another challenging conceptual
requirement, which is the support for other operation modes beyond
just time-bound rendering; these concerns make it desirable to
expand the internal representation of entries in the queue.
Concerns regarding performance are postponed deliberately,
until we can demonstrate the Scheduler-Service running under
regular operational conditions.
This is the first kind of integration,
albeit still with a synthetic load.
- placed two excessive load peaks in the scheduling timeline
- verified load behaviour
- verified timings
- verified that the scheduler shuts down automatically when done
- sample distance to scheduler head whenever a worker asks for work
- moving average with N = worker-pool size and damp-factor 2
- multiply with the current concurrency fraction
as an aside, the header lib/test/microbenchmark.hpp
turns out to be prolific for this kind of investigation.
However, it is somewhat obnoxious that the »test subject«
must expose the signature <size_t(size_t)>.
Thus, with some metaprogramming magic, an generic adaptor
can be built to accept a range of typical alternatives,
and even the quite obvious signature void(void).
Since all these will be wrapped directly into a lambda,
the optimiser will remove these adaptations altogether.
- An important step towards a complete »Scheduler Service«
- Correct timing pattern could be verified in detail by tracing
- Spurred some further concept and design work regarding Load-control
- draft the duty cycle »tick«
- investigate corner cases of state updates and allocation managment
- implement start and forcible stop of the scheduler service
Obviously the better choice and a perfect fit for our requirements;
while the system-clock may jump and even move backwards on time service
adjustments, the steady clock just counts the ticks since last boot.
In libStdC++ both are implemented as int64_t and use nanoseconds resolution
- Ensure the grooming-token (lock) is reliably dropped
- also explicitly drop it prior to trageted sleeps
- properly signal when not able to acquire the token before dispatch
- amend tests broken by changes since yesterday
Notably the work-function is now completely covered, by adding
this last test, and the detailed investigations yesterday
ultimately unveiled nothing of concern; the times sum up.
Further reflection regarding the overall concept led me
to a surprising solution for the problem with priority classes.
...especially for the case »outgoing to sleep«
- reorganise switch-case to avoid falling through
- properly handle the tendedNext() predicate also in boundrary cases
- structure the decision logic clearer
- cover the new behaviour in test
Remark: when the queue falls empty, the scheduler now sends each
worker once into a targted re-shuffling delay, to ensure the
sleep-cycles are statistically evenly spaced
...there seemed to be an anomaly of 50...100µs
==> conclusion: this is due to the instrumentation code
- it largely caused by the EventLog, which was never meant
to be used in performance-critical code, and does hefty
heap allocations and string processing.
- moreover, there clearly is a cache-effect, adding a Factor 2
whenever some time passed since the last EventLog call
==> can be considered just an artifact of the test setup and
will have no impact on the scheduler
remark: this commit adds a lot of instrumentation code
To cover the visible behaviour of the work-Function,
we have to check an amalgam of timing delays and time differences.
This kind of test tends to be problematic, since timings are always
random and also machine dependent, and thus we need to produce pronounced effects
...to make that abundantly clear: we do not aim at precision timing,
rather the goal is to redistribute capacity currently not usable...
Basically we're telling the worker "nothing to do right now, sorry,
but check back in <timespan> because I may need you then"
Workers asking for the next task are classified as belonging
to some fraction of the free capacity, based on the distance
to the closest next Activity known to the scheduler
...to bring it more in line with all the other calls dealing with Activity*
...allows also to harmonise the ActivityLang::dispatchChain()
...and to compose the calls in Scheduler directly
NOTE: there is a twist: our string-formatting helper did not render
custom string conversions for objects passed as pointer. This was a
long standing problem, caused by ambiguous templates overloads;
now I've attempted to solve it one level more down, in util::StringConv.
This solution may turn out brittle, since we need to exclude any direct
string conversion, most notably the ones for C-Strings (const char*)
In case this solution turns out unsustainable, please feel free
to revert this API change, and return to passing Activity& in λ-post,
because in the end this is cosmetics.
- organise by principles rather than implementing a mechanism
- keep the first version simple yet flexible
- conduct empiric research under synthetic load
Basic scheme:
- tend for next
- classify free capacity
- scattered targeted wait
The signature for the »post« operation includes the ExecutionCtx itself,
which is obviously redundant, given that this operation is ''part of this context.''
However, for mock-implementation of the ExecutionCtx for unit testing,
the form of the implementation was deliberately kept unspecified, allowing
to use functor objects, which can be instrumented later. Yet a functor
stored as member has typically no access to the "this"-ptr...
The approach to provide the ExecutionCtx seems to work out well;
after some investigation I found a solution how to code a generic
signature-check for "any kind of function-like member"...
(the trick is to pass a pointer or member-pointer, which happens
to be syntactically the same and can be handled with our existing
function signature helper after some minor tweaks)
The Activity-Language can be defined by abstracting away
some crucial implementation functionality as part of an generic
»ExecutionCtx«, which in the end will be provided by the Scheduler.
But how actually?
We want to avoid unnecessary indirections, and ideally we also want
a concise formulation in-code. Here I'm exploring the idea to let the
scheduler itself provide the ExecutionCtx-operations as member functions,
employing some kind of "compile-time duck-typing"
This seems to work, but breaks the poor-man's preliminary "Concept" check...
Notably I wanted an entirely static and direct binding
to the internals of the Scheduler, which can be completely inlined.
The chosen solution also has the benefit of making the back-reference
to the Scheduler explicitly visible to the reader. This is relevant,
since the Config-Subobject is *copied* into each Worker instance.
The »Scheduler Service« will be assembled
from the components developed during the last months
- Layer-1
- Layer-2
- Activity-Language
- Block-Flow
- Work-Force
* the implementation logic of the Scheduler is essentially complete now
* all functionality necessary for the worker-function has been demonstrated
As next step, the »Scheduler Service« can be assembled from the two
Implementation Layers, the Activity-Language and the `BlockFlow` allocator
This should then be verified by a multi-threaded integration test...
This central operation sits at a crossroad and is used
- from external clients to fed new work to the Scheduler
- from Workers to engage into execution of the next Activity
- recursively from the execution of an Activity-chain
From these requirements the semantics of behaviour can be derived
regarding the GroomingToken and the result values, which indicate
when follow-up work should be processed
T thread holding the »Grooming Token" is permitted to
manipulate scheduler internals and thus also to define new
activities; this logic is implemented as an Atomic lock,
based on the current thread's ID.
Notably both Layers are conceived as functionality providers;
only at Scheduler top-Level will functionality be combined with
external dependencies to create the actual service.
At first sight, this seems confusing; there is a time window,
there is sometimes a `when` parameter, and mostly a `now` parameter
is passed through the activation chain.
However, taking the operational semantics into account, the existing
definitions seem to be (mostly) adequate already: The scheduler is
assumed to activate a chain only ''when'' the defined start time is reached.
As follow-up to the rework of thread-handling, likewise also
the implementation base for locking was switched over from direct
usage of POSIX primitives to the portable wrappers available in
the C++ standard library. All usages have been reviewed and
modernised to prefer λ-functions where possible.
With this series of changes, the old threadpool implementation
and a lot of further low-level support facilities are not used
any more and can be dismantled. Due to the integration efforts
spurred by the »Playback Vertical Slice«, several questions of
architecture could be decided over the last months. The design
of the Scheduler and Engine turned out different than previously
anticipated; notably the Scheduler now covers a wider array of
functionality, including some asynchronous messaging. This has
ramifications for the organisation of work tasks and threads,
and leads to a more deterministic memory management. Resource
management will be done on a higher level, partially superseding
some of the concepts from the early phase of the Lumiera project.
This is Step-2 : change the API towards application
Notably all invocation variants to support member functions
or a reference to bool flags are retracted, since today a
λ-binding directly at usage site tends to be more readable.
The function names are harmonised with the C++ standard and
emergency shutdown in the Subsystem-Runner is rationalised.
The old thread-wrapper test is repurposed to demonstrate
the effectiveness of monitor based locking.
After the fundamental switch from POSIX to the C++14 wrappers
the existing implementation of the Monitor can now be drastically condensed,
removing several layers of indirection. Moreover, all signatures
shall be changed to blend in with the names and patterns established
by the C++ standard.
This is Step-1 : consolidate the Implementation.
(to ensure correctness, the existing API towards application code was retained)
While not directly related to the thread handling framework,
it seems indicated to clean-up this part of the application alongside.
For »everyday« locking concerns, an Object Monitor abstraction was built
several years ago and together with the thread-wrapper, both at that time
based on direct usage of POSIX. This changeset does a mere literal
replacement of the POSIX calls with the corresponding C++ wrappers
on the lowest level. The resulting code is needlessly indirect, yet
at API-level this change is totally a drop-in replacment.
The WorkForce (passive worker pool) has been coded just recently,
and -- in anticipation of this refactoring -- directly against std::thread
instead of using the old framework.
...the switch is straight-forward, using the default case
...add the ability to decorate the thread-IDs with a running counter
This solution is basically equivalent to the version implemented directly,
but uses the lifecycle-Hooks available through `ThreadHookable`
to structure the code and separate the concerns better.
This largely completes the switch to the new thread-wrapper..
**the old implementation is not referenced anymore**
...likewise using an detached »autonomous« Thread.
In this case however it is simpler to embed the complete use
of GtkLumiera into a lambda function, which ends with invoking
the terminationSignal functor. This way, the order of creation,
running the GTK-Loop and destroying the GUI is hard coded.
This, and the GUI thread prompted an further round of
design extensions and rework of the thread-wrapper.
Especially there is now support for self-managed threads,
which can be launched and operate completely detached from the
context used to start them. This resolves an occasional SEGFAULT
at shutdown. An alternative (admittedly much simpler) solution
would have been to create a fixed context in a static global
variable and to attach a regular thread wrapper from there,
managed through unique_ptr.
It seems obvious that the new solution is preferable,
since all the tricky technicalities are encapsulated now.
Add a complete demonstration for a setup akin to what we use
for the Session thread: a threaded component which manages itself
but also exposes an external interface, which is opened/closed alongside
...extract and improve the tuple-rewriting function
...improve instance tracking test dummy objects
...complete test coverage and verify proper memory handling
After quite some detours, with this take I'm finally able to
provide a stringent design to embody all the variants of thread start
encountered in practice in the Lumiera code base.
Especially the *self-managed* thread is now represented as a special-case
of a lifecycle-hook, and can be embodied into a builder front-end,
able to work with any client-provided thread-wrapper subclass.
extract into helper function to improve legibility.
This code is rather tricky since on invocation the hook is only provided
but not invoked. Rather, to adapt the argument types, it is wrapped
into a λ for adaptation, which then must be again bound *by value*
into yet another λ, since the Launch configuration builder is comprised
of a chain of captured functors, to be invoked later from the body of the
thread-wrapper object; this indirect procedure is necessary to ensure
all members are initialised *before* the new thread starts
to cover the identified use-cases a wide variety of functors
must be accepted and adapted appropriately. A special twist arises
from the fact that the complete thread-wrapper component stack works
without RTTI; a derived class can not access the thread-wrapper internals
while the policy component to handle those hooks can not directly downcast
to some derived user provided class. But obviously at usage site it
can be expected to access both realms from such a callback.
The solution is to detect the argument type of the given functor
and to build a two step path for a safe static cast.
after some further mulling over the design, it became clear that
a rather loose coupling to the actual usage scenario is preferrable.
Thus, instead of devising a fixed scheme how to reflect the thread state,
rather the usage can directly hook into some points in the thread lifecycle.
So this policy can be reduced to provide additional storage for functon objects.
...after resolving the fundamental design problems,
a policy mix-in can be defined now for a thread that deletes
its own wrapper at the end of the thread-function.
Such a setup would allow for »fire-and-forget« threads, but with
wrapper and ensuring safe allocations. The prominent use case
for such a setup would be the GUI-Thread.
So this finally solves the fundamental problem regarding a race on
initialisation of the thread-wrapper; it does *not* solve the same problem
for classes deriving from thread-wrapper, which renders this design questionable
altogether -- but this is another story.
In the end, this initialisation-race is rooted in the very nature of starting a thread;
it seems there are the two design alternatives:
- expose the thread-creation directly to user code (offloading the responsibility)
- offer building blocks which are inherently dangerous
this is a mere rearrangement of code (+lots of comments),
but helps to structure the overall construction better.
ThreadWrapper::launchThread() now does the actual work to build
the active std::thread object and assign it to the thread handle,
while buildLauncher is defined in the context of the constructors
and deals with wiring the functors and decaying/copying of arguments.
If we package all arguments together into a single tuple,
even including the member-function reference and the this-ptr
for the invokeThreadFunction(), which is the actual thread-functor,
then we can rely on std::make_from_tuple<T>(tuple), which implements
precisely the same hand-over via a std::index_sequence, as used by the
explicitly coded solution -- getting rid of some highly technical boilerplate
Concept study of the intended solution successful.
Can now transparently embed any conceivable functor
and an arbitrary argument sequence into a launcher-λ
Materialising into a std::tuple<decay_t<TYPES...>> did the trick.
Considering a solution to shift the actual launch of the new thread
from the initialiser list into the ctor body, to circumvent the possible
"undefined behaviour". This would also be prerequisite for defining
a self-managed variant of the thread-wrapper.
Alternative / Plan.B would be to abandon the idea of a self-contained
"thread" building block, instead relying on precise setup in the usage
context -- however, not willing to yield yet, since that would be exactly
what I wanted to avoid: having technicalities of thread start, argument
handover and failure detection intermingled with the business code.
On a close look, the wrapper design as pursued here
turns out to be prone to insidious data race problems.
This was true also for the existing solution, but becomes
more clear due to the precise definitions from the C++ standard.
This is a confusing situation, because these races typically do not
materialise in practice; due to the latency of the OS scheduler the
new thread starts invoking user code at least 100µs after the Wrapper
object is fully constructed (typically more like 500µs, which is a lot)
The standard case (lib::Thread) in its current form is correct, but borderline
to undefined behaviour, and any initialisation of members in a derived class
would be off limits (the thread-wrapper should not be used as baseclass,
rather as member)
...while reworking the application code, it became clear that
actually there are two further quite distinct variants of usage.
And while these could be implemented with some trickery based on
the Thread-wrapper defined thus far, it seems prudent better to
establish a safely confined explicit setup for these cases:
- a fire-and-forget-thread, which manages its own memory autonomously
- a thread with explicit lifecycle, with detectable not-running state
...hitting a roadblock however:
The existing Threads in the Lumiera application were effectively "detached"
But the C++14 framework requires us to keep the Thread-object alive
FamilyMember::allocateNextMember() was actually a post-increment,
so (different than with TypedCounter) here no correction is necessary
As an asside, WorkForce_test is sometimes unstable immediately after a build.
Seemingly a headstart of 50µs is not enough to compensate for scheduler leeway
The existing TypedCounter_test was excessively clever and convoluted,
yet failed to test the critical elements systematically. Indeed, two
bugs were hidden in synchronisation and instance access.
- build a new concurrent test from scratch, now using the threadBenchmark
function for the actual concurrent execution and just invoked a
random selected access to the counter repeatedly from a large number
of threads.
- rework the TypedContext and counter to use Atomics where applicable;
measurements indicate however that this has only negligible impact
on the amortised invocation times, which are around 60ns for single-threaded
access, yet can increase by factor 100 due to contention.
...these were already written envisionaging he new API,
so it's more or less a drop-in replacement.
- cant use vector anymore, since thread objects are move-only
- use ScopedCollection instead, which also has the benefit of
allocating the requires space up-front. Allow to deduce the
type parameter of the placed elements
... which became apparent after switching to the new Thread-wrapper implementation
... the reason is a bug in the Thread-Monitor (which will also be reworked soon)
While seemingly subtle, this is a ''deep change.''
Up to now, the project attempted to maintain two mutually disjoint
systems of error reporting: C-style error flags and C++ exceptions.
Most notably, an attempt was made to keep both error states synced.
During the recent integration efforts, this increasingly turned out
as an obstacle and source for insidious problems (like deadlocks).
As a resolve, hereby the relation of both systems is **clarified**:
* C-style error flags shall only be set and used by C code henceforth
* C++ exceptions can (optionally) be thrown by retrieving the C-style error code
* but the opposite is now ''discontinued'' : Exceptions ''do not set'' the error flag anymore
- the deadlock was caused by leaking error state through the C-style lumiera_error
- but the reason for the deadlock lies in the »convenience shortcut«
in the Object-Monitor scope guard for entering a wait state immediately.
This function undermines the unlocking-guarantee, when an exception
emanates from within the wait() function itself.
...this function was also ported to the new wrapper,
and can be verified now in a much more succinct way.
''This completes porting of the thread-wrapper''
Since the decision was taken to retain support for this special feature,
and even extend it to allow passing values, the additional functionality
should be documented in the test. Doing so also highlighted subtle problems
with argument binding.
A subtle yet important point: arguments will always be copied into the new thread.
This is a (very sensible) limitation introduced by the C++ standard.
To support seamless use, the thread-wrapper now rewrites the argument types
picked up from the invocation, to prevent passing on a reference type,
which typically ensues when invoking with a variable name. Otherwise
confusing error messages would be emitted from deep within the STD library.
As a further consequence, function signatures involving reference arguments
can no longer be bound (which is desirable; a function to be performed
within a separate thread must either rely on value arguments, or deliberately
use std::ref wrappers to pass references, assuming you know what you're doing)
- it is not directly possible to provide a variadic join(args...),
due to overload resolution ambiguities
- as a remedy, simplify the invocation of stringify() for the typical cases,
and provide some frequently used shortcuts
A common usage pattern is to derive from lib::Thread
and then implement the actual thread function as a member function
of this special-Thread-object (possibly also involving other data members)
Provide a simplified invocation for this special case,
also generating the thread-id automatically from the arguments
after all this groundwork, implementing the invocation,
capturing and hand-over of results is simple, and the
thread-wrapper classes became fairly understandable.
This relieves the Thread policy from a lot of technicalities,
while also creating a generally useful tool: the ability to invoke
/anything callable/ (thanks to std::invoke) in a fail-safe way and
transform the exception into an Either type
on second thought, the ability to transport an exception still seems
worthwhile, and can be achieved by some rearrangements in the design.
As preparation, reorganise the design of the Either-wrapper (lib::Result)
