The first complete integration test with Chain-Load
highlighted some difficulties with the overall load regulation:
- it works well in the standard case (but is possibly to eager to scale up)
- the scale-up sometimes needs several cycles to get "off the ground"
- when the first job is dispatched immediately instead of going
through the queue, the scheduler fails to boot up
- prime diagnostics with the first time invocation
- print timings relative to this first invocation
- DUMP output to watch the crucial scheduling operations
... so this (finally) is the missing cornerstone
... traverse the calculation graph and generate render jobs
... provide a chunk-wise pre-planning of the next batch
... use a future to block the (test) thread until completed
- decided to abstract the scheduler invocations as λ
- so this functor contains the bare loop logic
Investigation regarding hash-framework:
It turns out that boost::hash uses a different hash_combine,
than what we have extracted/duplicated in lib/hash-value.hpp
(either this was a mistake, or boost::hash did use this weaker
function at that time and supplied a dedicated 64bit implementation later)
Anyway, should use boost::hash for the time being
maybe also fix the duplicated impl in lib/hash-value.hpp
- use a dedicated context "dropped off" the TestChainLoad instance
- encode the node-idx into the InvocationInstanceID
- build an invocation- and a planning-job-functor
- let planning progress over an lib::UninitialisedStorage array
- plant the ActivityTerm instances into that array as Scheduling progresses
Introduced as remedy for a long standing sloppiness:
Using a `char[]` together with `reinterpret_cast` in storage management helpers
bears danger of placing objects with wrong alignment; moreover, there are increasing
risks that modern code optimisers miss the ''backdoor access'' and might apply too
aggressive rewritings.
With C++17, there is a standard conformant way to express such a usage scheme.
* `lib::UninitialisedStorage` can now be used in a situation (e.g. as in `ExtentFamily`)
where a complete block of storage is allocated once and then subsequently used
to plant objects one by one
* moreover, I went over the code base and adapted the most relevant usages of
''placement-new into buffer'' to also include the `std::launder()` marker
... special rule to generate a fixed expansion on each seed
... consecutive reductions join everything back into one chain
... can counterbalance expansions and reductions
...as it turns out, the solution embraced first was the cleanest way
to handle dynamic configuration of parameters; just it did not work
at that time, due to the reference binding problem in the Lambdas.
Meanwhile, the latter has been resolved by relying on the LazyInit
mechanism. Thus it is now possible to abandon the manipulation by
side effect and rather require the dynamic rule to return a
''pristine instance''.
With these adjustments, it is now possible to install a rule
which expands only for some kinds of nodes; this is used here
to crate a starting point for a **reduction rule** to kick in.
It seams indicated to verify the generated connectivity
and the hash calculation and recalculation explicitly
at least for one example topology; choosing a topology
comprised of several sub-graphs, to also verify the
propagation of seed values to further start-nodes.
In order to avoid addressing nodes directly by index number,
those sub-graphs can be processed by ''grouping of nodes'';
all parts are congruent because topology is determined by
the node hashes and thus a regular pattern can be exploited.
To allow for easy processing of groups, I have developed a
simplistic grouping device within the IterExplorer framework.
- with the new pruning option, start-Nodes can now be anywhere
- introduce predicates to detect start-Nodes and exit-Nodes
- ensure each new seed node gets the global seed on graph construction
- provide functionality to re-propagate a seed and clear hashes
- provide functionality to recalculate the hashes over the graph
up to now, random values were completely determined by the
Node's hash, leading to completely symmetrical topology.
This is fine, but sometimes additional randomness is desirable,
while still keeping everything deterministic; the obvious solution
is to make the results optionally dependent on the invocation order,
which is simply to achieve with an additional state field. After some
tinkering, I decided to use the most simplistic solution, which is
just a multiplication with the state.
...so this was yet another digression, caused by the desire
somehow to salvage this problematic component design. Using a
DSL token fluently, while internally maintaining a complex and
totally open function based configuration is a bit of a stretch.
For context: I've engaged into writing a `LazyInit` helper component,
to resolve the inner contradiction between DSL use of `RandomDraw`
(implying value semantics) and the design of a processing pipeline,
which quite naturally leads to binding by reference into the enclosing
implementation.
In most cases, this change (to lazy on-demand initialisation) should be
transparent for the complete implementation code in `RandomDraw` -- with
one notable exception: when configuring an elaborate pipeline, especially
with dynamic changes of the probability profile during the simulation run,
then then obviously there is the desire to use the existing processing
pipeline from the reconfiguration function (in fact it would be quite
hard to explain why and where this should be avoided). `LazyInit` breaks
this usage scenario, since -- at the time the reconfiguration runs --
now the object is not initialised at all, but holds a »Trojan« functor,
which will trigger initialisation eventually.
After some headaches and grievances (why am I engaging into such an
elaborate solution for such an accidental and marginal topic...),
unfortunately it occurred to me that even this problem can be fixed,
with yet some further "minimal" adjustments to the scheme: the LazyInit
mechanism ''just needs to ensure'' that the init-functor ''sees the
same environment as in eager init'' -- that is, it must clear out the
»Trojan« first, and it ''could apply any previous pending init function''
fist. That is, with just a minimal change, we possibly build a chain
of init functors now, and apply them in given order, so each one
sees the state the previous one created -- as if this was just
direct eager object manipulation...
...this is a more realistic demo example, which mimics
some of the patterns present in RandomDraw. The test also
uses lambdas linking to the actual storage location, so that
the invocation would crash on a copy; LazyInit was invented
to safeguard against this, while still allowing leeway
during the initialisation phase in a DSL.
...oh my.
This is getting messy. I am way into danger territory now....
I've made a nifty cool design with automatically adapted functors;
yet at the end of the day, this does not bode well with a DSL usage,
where objects appear to be simple values from a users point of view.
- Helper function to find out of two objects are located
"close to each other" -- which can be used as heuristics
to distinguish heap vs. stack storage
- further investigation shows that libstdc++ applies the
small-object optimisation for functor up to »two slots«
in size -- but only if the copy-ctor is trivial. Thus
a lambda capturing a shared_ptr by value will *always*
be maintained in heap storage (and LazyInit must be
redesigned accordingly)...
- the verify_inlineStorage() unit test will now trigger
if some implementation does not apply small-object optimisation
under these minimal assumptions
the RandomDraw rules developed last days are meant to be used
with user-provided λ-adapters; employing these in a context
of a DSL runs danger of producing dangling references.
Attempting to resolve this fundamental problem through
late-initialisation, and then locking the component into
a fixed memory location prior to actual usage. Driven by
the goal of a self-contained component, some advanced
trickery is required -- which again indicates better
to write a library component with adequate test coverage.
...now using the reworked partial-application helper...
...bind to *this and then recursively re-invoke the adaptation process
...need also to copy-capture the previously existing mapping-function
first test seems to work now
Investigation in test setup reveals that the intended solution
for dynamic configuration of the RandomDraw can not possibly work.
The reason is: the processing function binds back into the object instance.
This implies that RandomDraw must be *non-copyable*.
So we have to go full circle.
We need a way to pass the current instance to the configuration function.
And the most obvious and clear way would be to pass it as function argument.
Which however requires to *partially apply* this function.
So -- again -- we have to resort to one of the functor utilities
written several years ago; and while doing so, we must modernise
these tools further, to support perfect forwarding and binding
of reference arguments.
- strive at complete branch coverage for the mapping function
- decide that the neutral value can deliberately lie outside
the value range, in which case the probability setting
controls the number of _value_ result incidents vs
neutral value result incidents.
- introduce a third path to define this case clearly
- implement the range setting Builder-API functions
- absorb boundrary and illegal cases
For sake of simplicity, since this whole exercise is a byproduct,
the mapping calculations are done in doubles. To get even distribution
of values and a good randomisation, it is thus necessary to break
down the size_t hash value in a first step (size_t can be 64bit
and random numbers would be subject to rounding errors otherwise)
The choice of this quantiser is tricky; it must be a power of two
to guarantee even distribution, and if chosen to close to the grid
of the result values, with lower probabilities we'd fail to cover
some of the possible result values. If chosen to large, then
of course we'd run danger of producing correlated numbers on
consecutive picks.
Attempting to use 4 bits of headroom above the log-2 of the
required value range. For example, 10-step values would use
a quantiser of 128, which looks like a good compromise.
The following tests will show how good this choice holds up.
This highly optimised function was introduced about one year ago
for handling of denomals with rational values (fractions), as
an interim solution until we'll switch to C++20.
Since this function uses an unrolled loop and basically
just does a logarithmic search for the highest set bit,
it can just be declared constexpr. Moreover, it is now
relocated into one of the basic utility headers
Remark: the primary "competitor" is the ilogb(double),
which can exploit hardware acceleration. For 64bit integers,
the ilog2() is only marginally faster according to my own
repeated invocation benchmarks.
The first step was to allow setting a minimum value,
which in theory could also be negative (at no point is the
code actually limited to unsigned values; this is rather
the default in practice).
But reconsidering this extensions, then you'd also want
the "neutral value" to be handled properly. Within context,
this means that the *probability* controls when values other
than the neutral value are produced; especially with p = 1.0
the neutral value shall not be produced at all
...since the Policy class now defines the function signature,
we can no longer assume that "input" is size_t. Rather, all
invocations must rely on the generic adaptaion scheme.
Getting this correct turns out rather tricky again;
best to rely on a generic function-composition.
Indeed I programmed such a helper several years ago,
with the caveat that at that time we used C++03 and
could not perfect-forward arguments. Today this problem
can be solved much more succinct using generic Lambdas.
to define this as a generic library component,
any reference to the actual data source moust be extracted
from the body of the implementation and supplied later
at usage site. In the actual case at hand the source
for randomness would be the node hash, and that is
absolutely an internal implementation detail.
The idea is to use some source of randomness to pick a
limited parameter value with controllable probability.
While the core of the implementation is nothing more
than some simple numeric adjustments, these turn out
to be rather intricate and obscure; the desire to
package these technicalities into a component
however necessitates to make invocations
at usage site self explanatory.
...these were developed driven by the immediate need
to visualise ''random generated computation patterns''
for ''Scheduler load testing.''
The abstraction level of this DSL is low
and structures closely match some clauses of the DOT language;
this approach may not yet be adequate to generate more complex
graph structures and was extracted as a starting point
for further refinements....
With all the preceding DSL work, this turns out to be surprisingly easy;
the only minor twist is the grouping of nodes into (time)levels,
which can be achieved with a "lagging" update from the loop body
Note: next step will be to extract the DSL helpers into a Library header
...refine the handling of FrameRates close to the definition bounds
...implement the actual rule to scale allocator capacity on announcement
...hook up into the seedCalcStream() with a default of +25FPS
+ test coverage
...whenever a new CalcStream is seeded, it would be prudent
not only to step up the WorkForce (which is already implemented),
but also to provide a hint to the BlockFlow allocator regarding
the expected calculation density.
Such a hint would allow to set a more ample »epoch« spacing,
thereby avoiding to drive the allocator into overload first.
The allocator will cope anyway and re-balance in a matter of
about 2 seconds, but avoiding this kind of control oscillations
altogether will lead to better performance at calculation start.
The test case "scheduleRenderJob()" -- while deliberately operated
quite artificially with a disabled WorkForce (so the test can check
the contents in the queue and then progress manually -- led to discovery
of an open gap in the logic: in the (rare) case that a new task is
added ''from the outside'' without acquiring the Grooming-Token, then
the new task could sit in the entrace queue, in worst case for 50ms,
until the next Scheduler-»Tick« routinely sweeps this queue. Under
normal conditions however, each dispatch of another activity will
also sweep the entrance queue, yet if there happens to be no other
task right now, a new task could be stuck.
Thinking through this problem also helped to amend some aspects
of Grooming-Token handling and clarified the role of the API-functions.
Use a simple destructor-trick to set up a concise notation
for temporarily manipulating a value for testing.
The manipulation will automatically be undone
when leaving scope
For now, the `EngineObserver` is defined as an empty shell,
outfitted with a low-level binary message dispatch API.
Messages are keyed by a Symbol, which allows evolution of private message types.
Routing and Addressing is governed by an opaque size_t hash.
The `EngineEvent` data base class provides »4 Slots« of inline binary storage;
concrete subclasses shall define the mapping of actual data into this space
and provide a convenience constructor for events.
For use by the Scheduler, a `WorkTiming`-Event is defined based on this scheme;
this allows to implement the λ-work and λ-done of the Scheduler-`ExecutionCtx`.
These hooks will be invoked at begin and end of any render calculations.
...especially to prevent a deadline way too far into the future,
since this would provoke the BlockFlow (epoch based) memory manager
to run out of space.
Just based on gut feeling, I am now imposing a limit of 20seconds,
which, given current parametrisation, with a minimum spacing of 6.6ms
and 500 Activities per Block would at maximum require 360 MiB for
the Activities, or 3000 Blocks. With *that much* blocks, the
linear search would degrade horribly anyway...
WorkForce scales down automatically after 2 seconds when
workers fall idle; thus we need to step up automatically
with each new task.
Later we'll also add some capacity management to both the
LoadController and the Job-Planning, but for now this rather
crude approach should suffice.
NOTE: most of the cases in SchedulerService_test verify parts
of the component integration and thus need to bypass this
automatism, because the test code wants to invoke the
work-Function directly (without any interference
from running workers)
While testing, I repeatedly had SEGFAULT in the new thread-wrapper,
but only when running under debugger. While the language spec guarantees
that exit from the thread handle initialisation synchronizes-with
the start of the new thread, there is no guarantee in the reverse
direction. Here this means that the new thread may not see the
newly initialised thread handle ID at start. Thus I've added
a yield-wait at the very beginning of the new thread function.
Under normal conditions, the startup of a thread takes at least
100 - 500µs and thus I've never seen the problematic behaviour
without debugger. However, adding a yield-wait loop at that point
seems harmless (it typically checks back every 400ns or so).
All real usages of the thread wrapper in the application use
some kind of additional coordination or even a sync barrier
to ensure the thread can pick up all further data before
going into active work.
WARNING: if someone would detach() the thread immediately after
creating it, then this added condition would cause the starting
thread function to hang forever. In our current setup for the
thread wrapper, this is not possible, since the thread handle
is embedded into protected code. The earliest point you could
do that would be in the handle_begin_thread(), which is called
from the thread itself *after* the new check. And moreover,
this would require to write a new variation of the Policy.
While building increasingly complex integration tests for the Scheduler,
it turns out helpful to be able to manipulate the "full concurreency"
as used by Scheduler, WorkForce and LoadController.
In the current test, I am facing a problem that new entries from the
threadsafe entrance queue are not propagated to the priority queue
soon enough; partly this is due to functionality still to be added
(scaling up when new tasks are passed in) -- but this will further
complicate the test setup.
