this initially (on 1.9.18) triggered this extended digression;
The initial naive implementation (without backtracking) did not allow
to express such a simple thing like "function XXX" not invoked (again) after "function XXX"
...seems basically sane now.
Just we still need to wrap it one more time into IterableDecorator;
which means the overall scheme how to build and package the whole pipeline
is not correct yet.
Maybe it is not possible to get it packaged all into one single class?
on closer investigation it turned out that the logic of the
first design attempt was broken altogether. It did not properly
support backtracking (which was the reason to start this whole
exercise) and it caused dangling references within the lambda
closure once the produced iterator pipeline was moved out
into the target location.
Reasoning from first principles then indicated that the only sane
way to build such a search evaluation component is to use *two*
closely collaborating layers. The actual filter configuration
and evaluation logic can not reside and work from within the
expander. Rather, it must sit in a layer on top and work in
a conventional, imperative way (with a while loop).
Sometimes, functional programming is *not* the natural way
of doing things, and we should then stop attempting to force
matters against their nature.
...and TADAA ... there we get an insidious bug:
we capture *this by reference into the expansion functor,
and then we move *this away, out from the builder into the target....
Up to now, we had a very simplistic configuration option just
to search for a match, and we had the complete full-blown reconfiguration
builder option, which accepts a functor to work on and reconfigure the
embedded Filter chain.
It occurred to me that in many cases you'd rather want some intermediary
level of flexibility: you want to replace the filter predicate entirely
by some explicitly given functor, yet you don't need the full ability
to re-shape the Filter chain as a whole. In fact the intended use case
for IterChainSearch (which is the EventLog I am about to augment with
backtracking capabilities) will only ever need that intermediate level.
Thus wer're adding this intermediary level of configurability now.
The only twist is that doing so requires us to pass an "arbitrary function like thing"
(captured by universal reference) through a "layer of lambdas". Which means,
we have to capture an "arbitrary thingie" by value.
Fortunately, as I just found out today, C++14 allows something which comes
close to that requirement: the value capture of a lambda is allowe to have
an intialiser. Which means, we can std::forward into the value captured
by the intermediary lambda. I just hope I never need to know or understand
the actual type this captured "value" takes on.... :-)
with the augmented TreeExplorer, we're now able to get rid of the
spurious base layer, and we're able to discard the filter and
continue with the unfiltered sequence starting from current position.
build a special feature into the Explorer component of TreeExplorer,
causing it to "lock into" the current child sequence and discard
all previous sequences from the stack of child explorations
So we have now a reworked version of the internals of TreeExplorer in place.
It should be easier to debug template instantation traces now, since most
of the redundancy on the type parameters could be remove. Moreover, existing
pipelines can now be re-assigned with similarily built pipelines in many cases,
since the concrete type of the functor is now erased.
The price tag for this refactoring is that we have now to perform a call
through a function pointer on each functor invocation (due to the type erasure).
And seemingly the bloat in the debugging information has been increased slightly
(this overhead is removed by stripping the binary)
...step by step switch over to the new usage pattern.
Transformer should be the blueprint for all other functor usages.
The reworked solutions behaves as expected;
we see two functor invocations; the outer functor, which does
the argument adaptation, is allocated in heap memory
...based on a monadic tree expansion: we define a single step,
which takes the current filter configuration and builds the next
filter configuration, based on a stored chain of configuration functions
The actual exhausting depth-first results just by the greedy application pattern,
and uses the stack embedded in the "Explorer" layer of TreeExplorer
..this resolves the most challenging part of the construction work;
we use the static helper functions to infer a type and construct a suitable
processing pipeline and we invoke the same helper to initialise the base class
in the ctor.
Incidentally... we can now drop all the placeholder stubs,
since we now inherit the full iterator and child explorer API.
The test now starts actually to work... we get spam and sausage!
TODO: now actually fill in the expand functor such as to pick the
concrete filter step in the chain from a sequence of preconfigured
filter bindings
...now matters start to get really nasty,
since we have to pick up an infered type from a partially built pipeline
and use it to construct the signature for a functor to bind into the more elaborate complete pipeline
this is a tricky undertaking, since our treeExplore() helper constructs
a complex wrapped type, depending on the actual builder expressions used.
Solution is to use decltype on the result of a helper function,
and let the _DecoratorTraits from TreeExplorer do the necessary type adaptations
...it should have been this way all the time.
Generic code might otherwise be ill guided to assume a conversion
from the Iterator to its value type, while in fact an explicit dereferentiation is necessary
The intention is to augment the iterator based (linear) search
used in EventLog to allow for real backtracking, based on a evaluation tree.
This should be rather staight forward to implement, relying on the
exploreChildren() functionality of TreeExplorer. The trick is to package
the chained search step as a monadic flatMap operation
we did an unnecessary copy of the argument, which was uncovered
by the test case manipulating the state core.
Whew.
Now we have a beautiful new overengineered solution
outift the Filter base class with the most generic form of the Functor
wrapper, and rather wrap each functor argument individually. This allows
then to combine various kinds of functors
...this solution works, but has a shortcoming:
the type of the passed lambdas is effectively pinned to conform
with the signature of the first lambda used initially when building the filter.
Well, this is the standard use case, but it kind of turns all the
tricky warpping and re-binding into a nonsense excercise; in this form
the filter can only be used in the monadic case (value -> bool).
Especially this rules out all the advanced usages, where the filter
collaborates with the internals of the source.
while this is basically just code code cosmetics,
at least it marks this as a very distinct special case,
and keeps the API for the standard Filter layer clean.
a quite convoluted construct built from several nested generic lambdas.
When investigated in the debugger, the observed addresses and the
invoked code looks sane and as expected.
The intention is to switch from the itertools-based filter
to the filter available in the TreeExplorer framework.
Thus "basically" we just need to copy the solution over,
since both are conceptually equivalent.
However...... :-(
The TreeExplorer framework is designed to be way more generic
and accepts basically everything as argument and tries to adapt apropriately.
This means we have to use a lot of intricate boilerplate code,
just to get the same effect that was possible in Itertools with
a simple and elegant in-place lambda assignment
Fillter needs to be re-evaluated, when an downstream entity requests
expandChildren() onto an upstream source. And obviously the ordering
of the chained calls was wrong here.
As it turns out, I had discovered that necessity to re-evaluate with
the Transformer layer. There is a dedicated test case for that, but
I cut short on verifying the filter in that situation as well, so
that piece of broken copy-n-paste code went through undetected.
This is in fact a rather esoteric corner case, because it is only
triggered when the expandChildren() call is passed through the filter.
When otoh the filter sits /after/ the entity generating the expandChildren()
calls, everything works as intended. And the latter is the typical standard
usage situation of an recursive evalutation algorithm: the filter is here
used as final part to drive the evaluation ahead and pick the solutions.
There is a bug or shortcoming in the existing ErrorLog matcher implementation.
It is not really difficult to fix, however doing so would require us to intersperse
yet another helper facility into the log matcher. And it occurred to me, that
this helper would effectively re-implement the stack based backtracking ability,
which is already present in TreeExplorer (and was created precisely to support
this kind of recursive evaluation strategies).
Thus I intend to switch the implementation of the EventLog matcher from the
old IterTool framework to the newer TreeExplorer framework. And this intention
made me re-read the code, fixing several comments and re-thinking the design
seemingly my quick-n-dirty implementation was to naiive.
We need real backtracking, if we want to support switches
in the search direction (match("y").after("x").before("z")
Up to now, I have cheated myself around this obvious problem :-/
Greedy wildcard match .+ is unnecessary, since in case of a positive match,
the next given expression always follows immediately. We just want to skip
over some "syntactic noise"
This change makes the matching time linear in the size of the log.
But unfortunately, I still occasionally see an Segmentation Fault.
It seems to arise when compiling the regular expresions
e.g. the following RegExps cashed (right in the middle of the test)
after.+?_ATTRIBS_.+?ins.+?53 of 57 ≺358.gen010≻.+?mut.+?53 of 57 ≺358.gen010≻.+?ins.+?borgID.+?358.+?emu.+?53 of 57 ≺358.gen010≻
after.+?_ATTRIBS_.+?ins.+?53 of 63 ≺178.gen028≻.+?mut.+?53 of 63 ≺178.gen028≻.+?ins.+?borgID.+?178.+?emu.+?53 of 63 ≺178.gen028≻
after.+?_ATTRIBS_.+?ins.+?53 of 59 ≺498.gen038≻.+?mut.+?53 of 59 ≺498.gen038≻.+?ins.+?borgID.+?498.+?emu.+?53 of 59 ≺498.gen038≻
after.+?_ATTRIBS_.+?ins.+?53 of 60 ≺223.gen003≻.+?mut.+?53 of 60 ≺223.gen003≻.+?ins.+?borgID.+?223.+?emu.+?53 of 60 ≺223.gen003≻
after.+?_ATTRIBS_.+?ins.+?53 of 78 ≺121.gen015≻.+?mut.+?53 of 78 ≺121.gen015≻.+?ins.+?borgID.+?121.+?emu.+?53 of 78 ≺121.gen015≻
This finishes the first round of design drafts in this area.
Right now it seems difficult to get any further, since most of
the actual view creation and management in the UI is not yet coded.
The boost::hash documentation does not mention a significant change in that area,
yet the frequent collisions on identifiers with number suffix do not occur anymore
in Boost 1.65
On rare occasions, the test thread itself consumes faster than the producer threads feed new test data.
Make sure the test does not hangin such a situation
The original goal for #1129 (ViewSpecDSL_test) is impossible to accomplish,
at least within our existing test framework. Thus I'll limit myself to coding
a clean-room integration test with purely synthetic DSL definitions and mock widgets
...still quite braindead, but allows at least to cover the standard case as well.
A better mock element access service would at least traverse a GenNode-Tree,
and thus emulate the behaviour of the real service; yet both seems way beyond
scope right now, and all I need is some basic coverage of the Interface
My understanding is that in the standard use case, we precisely know what to expect
and just go ahead and perform the conversion. Thus it is pointless to introduce
fine grained distinctions. When the access fails, this always indicates some broken
application logic, and just raises an error.
With this solution, somewhere deep down within the implementation
the knowledge about the actual result type would be encoded into
the embedded VTable within a lib::variant. At interface level,
ther will be a double dispatch based on that result type
and the desired result type, leading either to a successful
access or an error response.
Basically the mocking mechanism just switches the configuration
and then waits for the service to be accessed in order to cause acutual
instantiation of the mock service implementation. But sometimes we want
to prepare and rig the mock instance prior to the first invocation;
in such cases it can be handy just to trigger the lazy creating process
Attempt to find my way back to the point
where the digression regarding dependency-injection started.
As it turns out, this was a valuable digression, since we can rid ourselves
from lots of ad-hoc functionality, which basically does in a shitty way
what DependencyFactory now provides as standard solution
FIRST STEP is to expose the Navigator as generic "LocationQuery" service
through lib::Depend<LocationQuery>
I am fully aware this change has some far reaching ramifications.
Effectively I am hereby abandoning the goal of a highly modularised Lumiera,
where every major component is mapped over the Interface-System. This was
always a goal I accepted only reluctantly, and my now years of experience
confirm my reservation: it will cost us lots of efforts just for the
sake of being "sexy".
...and package the ZombieCheck as helper object.
Also rewrite the SyncClassLock_test to perform an
multithreaded contended test to prove the lock is shared and effective
- state-of-the-art implementation of access with Double Checked Locking + Atomics
- improved design for configuration of dependencies. Now at the provider, not the consumer
- support for exposing services with a lifecycle through the lib::Depend<SRV> front-end
...which declare DependencyFactory as friend.
Yes, we want to encourrage that usage pattern.
Problem is, std::is_constructible<X> gives a misleading result in that case.
We need to do the instantiation check within the scope of DependencyFactory
ideally we want
- just a plain unique_ptr
- but with custom deleter delegating to lib::Depend
- Depend can be made fried to support private ctor/dtor
- reset the instance-ptr on deletion
- always kill any instance
all these tests are ported by drop-in replacement
and should work afterwards exactly as before (and they do indeed)
A minor twist was spotted though (nice to have more unit tests indeed!):
Sometimes we want to pass a custom constructor *not* as modern-style lambda,
but rather as direct function reference, function pointer or even member
function pointer. However, we can not store those types into the closure
for later lazy invocation. This is basically the same twist I run into
yesterday, when modernising the thread-wrapper. And the solution is
similar. Our traits class _Fun<FUN> has a new typedef Functor
with a suitable functor type to be instantiated and copied. In case of
the Lambda this is the (anonymous) lamda class itself, but in case of
a function reference or pointer it is a std::function.
...which showed up under high system load.
The initialisation of the member variables for the check sum
could be delayed while the corresponding thread was already running
...written as byproduct from the reimplementation draft.
NOTE there is a quite similar test from 2013, DependencyFactory_test
For now I prefer to retain both, since the old one should just continue
to work with minor API adjustments (and thus prove this rewrite is a
drop-in replacement).
On the long run those two tests could be merged eventually...
decided to add a very specific preprocessing here, to make the DSL notation more natural.
My guess is that most people won't spot the presence of this tiny bit of magic,
and it would be way more surprising to have rules like
UICoord::currentWindow().panel("viewer").create()
fail in most cases, simply because there is a wildcard on the perspective
and the panel viewer does not (yet) exist. In such a case, we now turn the
perspective into a "existential quantified" wildcard, which is treated as if
the actually existing element was written explicitly into the pattern.
...actually just more test coverage,
the feature is already implemented.
What *could* be done though is to inject that UIC_ELIDED marker
on missing perspective specs in create clauses automatically...
This looks like YAGNI, and it would be non trivial to implement.
But since the feature looks important for slick UI behaviour,
I've made a new ticket and leave it for now
with the exception of some special situations,
which require additional features from the engine,
especially binding-on-context
Not sure though if I'll implement these or say YAGNI
- the default should be to look for total coverage
- the predicates should reflect the actual state of the path only
- the 'canXXX' predicates test for possible covering mutation
I set out to "discover" what operations we actually need on the LocationQuery
interface, in order to build a "coordinate resolver" on top. It seems like
this set of operations is clear by now.
It comes somewhat as a surprise that this API is so small. This became possible
through the idea of a ''child iterator'' with the additional ability to delve down and
expand one level of children of the current element. Such can be ''implemented''
by relying on techniques similar to the "Monads" from functional programming.
Let's see if this was a good choice. The price to pay is a high level of ''formal precision''
when dealing with the abstraction barrier. We need to stick strictly to the notion of a
''logical path'' into a tree-like topology, and we need to be strong enough never to
give in and indulge with "the concrete, tangible". The concrete reality of a tree
processing algorithm with memory management plus backtracking is just to complex
to be handled mentally. So either stick to the rules or get lost.
...but not yet switched into the main LocationQuery interface,
because that would also break the existing implementation;
recasting this implementation is the next step to do....
...which basically allows us to return any suitable implementation
for the child iterator, even to switch the concrete iteration on each level.
We need this flexibility when implementing navigation through a concrete UI
...at least when using a wrapped Lumiera Iterator as source.
Generally speaking, this is a tricky problem, since real mix-in interfaces
would require the base interface (IterSource) to be declared virtual.
Which incurres a performance penalty on each and every user of IterSource,
even without any mix-in additions. The tricky part with this is to quantify
the relevance of such a performance penalty, since IterSource is meant
to be a generic library facility and is a fundamental building block
on several component interfaces within the architecture.
This is just a temporary solution, until IterSource is properly refactored (#1125)
After that, IterSource is /basically a state core/ and the adaptor will be more or less trivial
- as it stands currently, IterSource has a design problem, (see #1125)
- and due to common problems in C++ with mix-ins and extended super interfaces,
it is surprisingly tricky to build on an extension of IterSource
- thus the idea is to draft a new solution "in green field"
by allowing TreeExplorer to adapt IterSource automatically
- the new sholution should be templated on the concrete sub interface
and ideally even resolve the mix-in-problem by re-linearising the
inheritance line, i.e. replace WrappedLumieraIter by something
able to wrap its source, in a similar vein as TreeExplorer does
...this was a difficult piece of consideration and analysis.
In the end I've settled down on a compromise solution,
with the potential to be extended into the right direction eventually...
several extensions and convenience features are conceivable,
but I'll postpone all of them for later, when actual need arises
Note especially there is one recurring design challenge, when creating
such a demand-driven tree evaluation: more often than not it turns out
that "downstream" will need some information about the nested tree structure,
even while, on the surfice, it looks as if the evaluation could be working
completely "linearised". Often, such a need arises from diagnostic features,
and sometimes we want to invoke another API, which in turn could benefit
from knowing something about the original tree structure, even if just
abstracted.
I have no real solution for this problem, but implementing this pipeline builder
leads to a pragmatic workaround: since the iterator already exposes a expandChildren(),
it may as well expose a depth() call, even while keeping anything beyond that
opaque. This is not the clean solution you'd like, but it comes without any
overhead and does not really break the abstraction.
...so sad.
The existing implementation was way more elegant,
just it discarded an exahusted parent element right while in expansion,
so effectively the child sequence took its place. Resolved that by
decomposing the iterNext() operation. And to keep it still readable,
I make the invariant of this class explicit and check it (which
caught yet another undsicovered bug. Yay!)
