decision: the base for any deadline calculations
is the expected real time corresponding to the grid origin.
This value is contained in the Timings record.
this clarifies the relation of TimeAnchor and Timings,
the latter act as a general spec and abstracted grid,
while the latter actually performs the conversion and
deadline checking
Rationale: this is the *support* Library.
The real "Lumiera-Library" does not exist yet.
liblumiera.so will be the *interface* every external
module / plug-in uses to get Lumiera functionality.
Especially the work on Library dependency clean-up
made outright clear, that this interface library
needs to be a separate piece of software, which is
carefully crafted, and more-or-less depends on the
whole application.
the buildsystem will now pick up and link
all test cases according to the layer, e.g.
backend tests will automatically be linked
against the backend + library solely.
tests used to be defined ad hoc and test definitions
are scattered confusingly over various directories.
Now built some simple rules into the buildsystem
to allow organising the tests into layers and
linking them accordingly.
Note: this switches to building shared objects
for the test classes too, which effectively speeds up
both re-building and re-running of test cases
Our libraries constitute a clear dependency hierarchy,
we do not want circular dependencies. Declaring these
dependencies while creating the shared libraries would
allow strict checking by the linker; but unfortunately
this also creates transitive depdendencies stored as
DT_NEEDED tags.
While basically this would be just fine, the resolution of $ORIGIN
on gets confused in case of transitively defined library dependencies
over multiple hops, especially in case when actually no symbol of this
transitive dependency is used. Since these newer systems set the
--as-needed switch for linking by default, these unnecessary
DT_NEEDED entries will be purged from the executable, but of course
not from the shared library causing the transitive dependencies.
As a consequence, when loading the executable, the $ORIGIN resolution
mechanism doesn't act on the dependencies recorded in the library,
causing the shared loader to abort with an "unresolved dependency"
So the resolution for these problems is not to use transitive
dependencies on libraries intended to be found via $ORIGIN
This is kind of a workaround to avoid having to maintain two variants.
Explanation: between Boost 1.42 and 1.52 there was the transition to a
reworked version of the filesystem library, itroducing some breaking changes
The new version distinguishes much clearer between the native and the
generic representation of paths -- which becomes relevant when porting
to non-POXIX operating systems.
Actually the intention was to use the generic path representation in all
configuration; currently this distinction is moot, since we're caring
only for POSIX systems.
So the workaround is to use the fsys::path::string() function, which
is available in both versions, but changed meaning to yield the native
string. Later, when able to deprecate older Boost versions, we should
switch to generic_string()
Note: an alternative solution was found by Mike Fisher in 3b39f35
using the compiletime define BOOST_FILESYSTEM_VERSION=2
See also ticket #896
now this library doesn't refer to any symbols from
Proc-Layer anymore. Resolving these problems
highlighted IMHO a serious shortcomming of our
interface system, which hinders the building
of abstractions at interface level
there is now a mechanism to allow sprcialised queries
to generate this syntactic representation only on demand
The actual concrete representation e.g. for scope queries
still remains TODO, but this won't really change
until we target the integration of a real resoloution engine
while refactoring, I thought it might be a good idea
only to use Query objects. But in this special case,
most often you'd just want to pass in a simple query
with a literal query string. So this convenience shortcut
indeed makes sense.
...to extract the syntetic ordering from
DefsRegistry and make that a responsibility
of the (internal) syntactic representation
of the query.
doesn't pass the compiler yet
effectively this joins the two existing lines
of "Query" classes into one systematic representation
Next step would be to move all mutation operations
over to the Query::Builder
time handling is part of the library, while this
convenience shortcut relies on the Advice system,
which resides in the application lib.
To allow this kind of symbolic acces to a grid
entity defined "elesewhere", client code needs
to be linked against liblumieracore.so
especially this allows to use the Advice system
or the query resolvers from within library facilities
to refer to other implementation level services by name
the rules-based configuration and query system
will be located within the core application,
while the concrete implementation facilities
are expected to reside within the session or
maybe also the GUI.
This is kind of a 'rochade' refactoring to resolve
circular library dependencies and confine the parts
dependant on the session and MObjects to the Proc-Layer
And while we're in the middle of chainsaw surgery,
we'll concentrate further query-based facilities
alongside the config-rules within the App core.
This template was a leftover from the early days
of Lumiera development and doesn't provide any
substantial value as an abstraction.
For the more intricate cases, we're using the
lib::MultiFact template, which allows to install
several "fabrication" functions at runtime
the solution is to introduce a superinterface
and let Dispatcher augment that with the specific parts.
This way, the Job planning only has to rely on the
rather generic stuff (TimeAnchor, FrameCoord)
NOTE: this commit makes the whole JobPlanning machinery
compilable for the first time!
..the Idea is to rely on some kind of service,
to break the cyclic dependency with the Dispatcher.
But I seem unable to find a natural location or
concept to house that service.
basically we had two lines of doubly nested capsules, due to
using the IterAdaptor template. Actually, the evaluation stack
within JobTicket can be considered an implementation detail and
thus doesn't require an iterator interface; the intention is to
use this through JobPlanning solely.
Thus this reworking removes the special iterator within JobTicket,
but retains the idea of exposing the "current" JobTicket through
a smart pointer or operator->()
work done during the FrOSCon travel
especially the exploration stack is pushed down
first successful definition of all the JobPlanning classes
just the framework of classes necessary to pass the compiler;
all implementation is still stubbed
brainstorming how to implement the job planning stage
the idea is to built on top of the IterExplorer,
but have the "stack" of re-evaluation integrated
into a custom type, which exploits the static
node network structure to avoid heap allocations
solution idea: again use a builder function?
the template _Fun started as an internal helper
for function-closure, but seems to be of
general use. Thus move it into meta/function.hpp
(function-closure.hpp is heavyweight)
this enables expansion of a (functional) data structure
until exhaustion -- which is what we need to
build job functors by traversing and expanding
an arbitrarily nested job definition structure
the intention is to use this to simplify
generating render jobs based on the elaborated
dependency network of the render nodes. The key
challenge is to overcome the necessity to
store partially done evaluations as
continuation
the tricky part seems to be how to combine the
source iterators into a new monad instance, while
keeping this "Combinator" Strategy configurable
...just passes the compiler, while still lacking
even the generic implementation of joining
together the source iterators
The idea is to avoid building a data structure
for intermediary results, while still being able
to process a variably sized and arbitrary shaped
set of source data
without any trickery, we'll always get two indirections.
Thus, the decision is to turn the 2nd indirection
into a VTable call; this way, basically the JobClosure
also acts as job functor itself.
implemented as extension to the linear combinations.
I decided to use the same "always floor" rule
as employed for time quantisation. Moreover,
we don't support floating point, only rationals
funny enough this possible memory corruption
didn't happen in the unit test, because my
compiler optimised the additional int field
of class SubDummy, making it the same size
of the baseclass. Now matters should be safe.
this draft is based on
- Cehteh's draft for the scheduler
- my plannings about segmentation and JobTicket
it defines "Job" as a closure which can be invoked
from plain-C, using the information in the
job descriptor datastructure
also touches the question how to represent the job
descriptor datastructure. @Cehteh: I've just pasted
in your preliminary data struct definitinons
from the relevant mailing list discussions.
instead of (ab)using the Timings spect for a
runtime switch, better use the existing
MockInjector facility and thus turn the
mock engine mode into a global switch
I think it's smart to rather use ALSA directly instead of PortAudio.
ALSA is push AFAIK, and talking about it here at the hackspace, seems
like the better choice. It's a bit lower level, but anyway everything
speaks ALSA anyway. It's not like there's any reason to use PortAudio
at all. It's just an extra abstraction.
Coding for ALSA it'll also work with Pulseaudio and esd. Do people
really use other sound systems than Pulseaudio, esd or plain ALSA?
I can't think of it.
I really the idea about building a small tool first. I'll do that.
Also thought about making a small blikning cursor/text output, and
syncing a BEEP-sound to that, so that I can test around with throwing
in lots and lots of latency between "me" and the video, and try to
sync it anyway.
I should be able to read back from the sound card (or pulse audio
underneath, it will just work with alsa as the abstraction) how long
it takes for the bytes I'm pushing to reach the speakers, and do some
buffer tuning on that.
The goal is to make the build scrips more clear
at first sight. So move the main build targets
into a separate SConscript, to make them similar
to the tests, research and tools.
The final goal of this makeover is to reduce
the main SConstruct as much as possible
this turns out to be the typical usage scenario
for ScopedCollection: a manager object owning
the collection will populate it with specially
crafted components and invoke a member function
for creating the individual components.
This shortcut avoids using tr1::bind alltogether
