- decision: the Monad-style iteration framework will be abandoned
- the job-planning will be recast in terms of the iter-tree-explorer
- job-planning and frame dispatch will be disentangled
- the Scheduler will deliberately offer a high-level interface
- on this high-level, Scheduler will support dependency management
- the low-level implementation of the Scheduler will be based on Activity verbs
This finishes a long lasting effort to rework the top-level of the Lumiera GTK UI,
to adapt to GTK-3 and the new asynchronous message based architecture.
Special credits and thanks to
* Joel Holdsworth
* Stefan Kangas
Without their relentless foundational work, the Lumiera UI could
never be where it is now. Even if some code was rewritten and several
parts of the old GTK-2 implementation are now obsolete, numerous ideas
solutions and inspirations were drawn from those early contributions
and live on as part of the reworked GUI.
for sake of developement of the timeline body drawing code,
several tweaks were added to make the impact of the styling stand
out clearly. This changeset removes all those tweaks and restors
the code to intended neutral behaviour
Moreover, the cursom drawing of the timeline now requires some
basic aids to be present in the stylesheet, otherwise the track structure
will not be visible. Thus add some minimalistic styling to the
"light-theme-complement"-stylesheet, mostly based on the usual
predefined theme colours and some box-shadow settings.
This is by no means an adequate graphical solution,
yet it should be enough to get on with coding....
check private notes and mindmap and fix some remaining minor inconsistencies,
notably the calculations in the overlay renderer in the `BodyCanvasWidget`.
The drawing code extracts style information from some "virtual"
widgets, which serve as logical placeholder for the actual nested
structure of tracks.
For sake of demonstration, I used rather obvious colours and
also all kinds of margin and padding; a screenshot was added
with annotations to indicate where some specific style settings
are utilised from the drawing code
Not sure if the initial window width is used properly for calibration
of ZoomWindow "pixel width" base setting.
Follow-up to the layout logic established with this commit:
09714cfe28
An extended round of rebuilding and reworking the global UI structures
can be concluded now. A flexible recursive structure of Tracks has
been implemented for the new Timeline-UI, allowing to contro all
relevant aspects of structure composition by **Diff Messages** sent
up from the Steam-Layer into the UI.
Moreover, the ability to control the custom drawing code through regular
**CSS style rules** has been demonstrated, allowing for seamless integration
of Lumiera UI elements with the existing desktop theme.
This completes the initial implementation round for the TrackHead.
- arrangement and layout for nested sub-Tracks is now settled
- a graphical representation of scope nesting was implemented
Postponed for later...
- still some minor discrepancies on synchronisation of vertical space
between TrackHead and custom drawing in the body (off-by-one?)
- Expanding / Collapsing of Tracks
- Implement actual Controls to influence the Scope, e.g. Volume, Mix-Mode
- Dynamically indicate selection and Muting on the structure display
While by default the Cairo Context is scaled to device units,
we must not assume that the given Context is unscaled; rather
it might have been deliberately scaled...
A notable example is the Gtk Inspector, which offers a "Magnifier" feature
- pick up all relevant values from CSS
- also control the width of the StaveBracket
- observe the given overall height
Moreover, complete documentation drawing in Inkscape
and add a page to the TiddlyWiki, describing the principles
underlying this design and construction.
.timeline__head : The complete header container on the left side
.timeline__navi : navigation control at top
.timeline__pbay : container holding the patchbay on the left side
.fork__head : each individual TrackHeadWidget (possibly nested)
.fork__control : container for the control components for each track scope
.fork__bracket : the StaveBracket drawing to indicate the nesting structure
The tricky part is to derive the anchor point for the upper
and the lower cap of the bracket, taking into account possible padding.
There seems to be a bug hidden somewhere in this logic, since the
line turns out too short at the lower end....?
According to the documentation, we should be able to get a Pango
font description from the CSS style context, and from there we should
be able to retrieve a font-size specification (and a DPI for the display)
Running this experimental code yields a font-size value of 9pt,
leading to a scale factor of about ~6, which seems plausible.
after weighting in the pro, and cons,
I decided to follow the standard path and pick up values
for each StaveBracket instance individually from Gtk::StyleContext,
assuming that the GTK framework will care for caching and performance
Identify the elements of the construction geometry in the "Sketch"
object in the FreeCAD document and paste the corresponding coordinate
values into the SVG drawing prepared for documentation.
The arc segment parameters seemingly are given in radians;
and while FreeCAD uses the common mathematical right-handed orientation,
the orientation in SVG is applied clockwise rather.
...since the construction is determined now (and was worked out in FreeCAD),
the SVG will serve to document the construction; thus the drawing
primitives are rearranged to use the unscaled reference coordinates
to be extracted from the FreeCAD document; all scaling and placement
in the SVG document will be applied through common groups.
My idea was to use the brackets from musical notation as inspiration;
if you know some principles of typography, it is rather straight-forward
to come up with a pleasing design of such a bracket, using a
cascade of golden ratio relationships.
BUT ... all of this is geometry, and translating that into a symbolic
or numerical calculation is excessively complicated. Thus I looked
for ways to use some geometry or CAD software to build such a construction.
The geometry software I tired was woefully inadequate for this task.
Using the Constraint system in FreeCAD, building the construction went
smooth and straight forward, but then I was unable to export that drawing
in a way indicating the construction clearly.
So in the end, I'll have to hand-pick the resulting numerical coordinates
from the FreeCAD XML document and integrate them directly into Cairo
drawing code...
...as it turned out, it suffices just to state desired behaviour explicitly
- make the StaveBracket expand=false
- declare the HeadControl expand=true
The reason lies in the fact that on leaf-tracks there are just two
adjacent cells in a single row, lacking any exterior source of layout guidance.
...just drawing a marker cross for now to indicate allocated size;
speaking of size -- GTK sometimes expands allocation horizontally,
while we'd prefer an absolutely fixed size for the purpose at hand.
Intention is to shift focus of development work down towards Player and Scheduler soon.
However, since the timeline display saw substantial improvement it seems prudent
to finish work on some open ends, notably
- the track head structure
- the drawing and styling code
While content rendering for Clip widgets can safely be postponed, regarding the TrackHeadWidget,
where custom drawing is planned to display a structural outline of the nested scopes, some
ground work should be completed to make those plannings explicit.
After sleeping some nights over it, rework the wording to make
my reasoning more clear and remove any possibly insulting undertone.
I have seen what I describe here, happening over and over again --
and several times I myself was the one cooking up "simplifications",
which caused lots of pain further down the road.
During the last years, I became more and more doubtful and regretted
that decision. In hindsight, the fundamental conflict was present
already in the original discussion.
My own experience showed me again and again: skipping the hard work
of specification for sake of some kind of fluid prototyping rarely
leads to anything solid. If "time to market" counts, this can be
a viable strategy though...
This both demonstrates the layout of the `TrackHeadWidget`
and puts `ElementBoxWidget` into intended use to indicate
the scope of a track and to provide a placement icon and
an expander/collapser button.
see #1018
see #1219
Layout calculation and balancing between body and track header
now works reasonably well, labels are placed properly and the
calculated layout remains stable when changing window size,
connected panes and scrollbars behave as expected now.
Quite a feat!
...to properly account for
- the "prelude" padding above the root track
- overview rulers located into a fixed separate canvas at top
- slope-down and slope-up borders around nested tracks.
After testing, results seem now to be accurate up to ± 1px
Finally (sigh)
As it turns out, we need to take the actual allocation of the cells
within the grid explicitly into account: combined cells will report
their extension for each of the underlying cells, thus leading to
excessively overestimated measurements.
So we now calculate the overall height based on the actual structure
- first row holds the label
- left column below used as expander
- right column holds individual content
Remaining problems:
- height of ruler canvas at top not taken into account (11px in this example)
- start of sub-track headers not synchronised with start of sub-tracks
in the body area
...seemingly the allocation of grid cells in the `TrackHeadWidget`
is not quite correct yet: even when there are nested sub-tracks,
we always need another row to hold the controls corresponding to
the track itself and the whole scope. And this row is also what
should be adjusted to match the vertical extension of the content
area.
As it turns out, the whole topic how to handle collapsed tracks
was not even considered yet; the calculation of the "track profile"
would need to be reworked to accommodate collapsed tracks, see: #1265
Sometimes, fractional seconds in the ZoomWindow metric can build up
to numerator and denominator values in the 64-bit integer domain.
Thus the division and truncation of the Window pixel with value
must be done in int64_t, while the result value is then
guaranteed to be a small integer < 100000
This caused the canvas to flicker and jump in size and the
resulting scrollbar change caused various cascading effects
on the further layout calculations...
Note: the actual root cause, why this re-entrance happens,
is due to another obvious numerics bug not yet solved.
Here, the canvas width was suddenly set to zero, causing
the scrollbar position to change and thus the ZoomWindow
to re-fire the structure change signal.
However, such invalidation of previously established baseline
values can never be totally excluded in advanced layout calculations,
and thus the evaluation mechanism must be prepared and re-triggered
to start over, until a stable layout is achieved.
- rearrange cell content and disable auto-expand to prevent
the content area from becoming oversized initially
- fix autocompletion error in signal binding,
causing segfault when moving the scrollbar
attempting to get the vertical space allocation in header and content area
synchronised; previously we conflated the content size and additional
padding, but even after distinguishing both, we still get a cyclic
dependency, leading to progressive increasing of allocated size...
After quite some tinkering, instead of extending the DisplayManager interface,
I now prefer to treat this connection rather as an intricate implementation detail:
The TimelineLayout implementatino now provides two translation functions,
which are directly wired as slots from the Signals emitted by moving the
hand of the scrollbar; the idea is that these functions mutate the ZoomWindow,
which then triggers a DisplayEvaltuation, which in turn causes the
drawing code to pick up and translate back the new metric and position.
Results look promising, insofar the DisplayEvaluation is now triggered
repeatedly, and the actual window width in pixel is propagated;
however, the response of the layout code is seemingly random at times,
the allocated height grows monontonously and the code Segfaults when
moving the scrollbar...
this makes the arrangement more symmetric and natural
and also makes the overview ruler scroll alongside the content pane,
thereby creating the (intended) impression of one uniform layout space
As it turns out, this happens as side-effect from the workaround 2019-08-22
fc5eaf857c
Obviously, just set_size() on the canvas is not sufficient for
GTK actually to establish a size-request (seemingly the canvas counts
as /empty/ and only real widgets would make a difference).
However, since the ruler canvas is directly placed into the box,
and not adapted by a ScrolledWindow, explicitly set_size_request()
also causes the enclosing Box to "inherit" this minimal required size,
thereby also spreading out the BodyCanvasWidget beyond the size
actually available. GTK handles this situation by hard-clipping
on the right side, which causes the vertical scrollbar to disappear
and keeps the horizontal scrollbar disabled (since nominally it still
spans the whole size available, even while this size is then clipped
subsequently).
This changeset adds a lot of debug printing and demonstrates this
behaviour by setting only a minimal horizontal size_request, so that
the window is no longer expanded and clipped.
This does not really change the logic of the DisplayEvaluation mechanism,
but makes it much more flexible: instead of having two hard wired components,
the DisplayEvaluation visitor now holds a collection of LayoutElement pointers.
This way, the Layout manager itself (on behalf of the ZoomWindow) can
participate in the process, and on activation will now establish the
window width in pixel.
This works now insofar the drawing on the canvas is adapted coherently;
however something with the setup of the Scrollbar is still not quite right;
some time ago I recall the scrollbar worked, but now it is blocked
and the canvas just clips to the right side.
